BLOG CATEGORIES

Ford Fiesta ST Direct Fit Catch Can Kit 2014+

  1. Keep Your Intake Clean - Oil Catch Can R&D, Part 2: Bracket Fabrication

    Keep Your Intake Clean - Oil Catch Can R&D, Part 2: Bracket Fabrication

    After removing both catch cans for data collection in our previous post, we discussed the idea of relocating the bracket that holds the PCV catch can to a different area in the engine bay. We mentioned earlier that we were toying with the idea because the current location of the Fiesta ST catch can raised some concerns. One of them being that the current location for the catch can would interfere with right-hand drive (RHD) applications of the Fiesta ST, and we want this catch can to be all inclusive. In addition, it came to our attention later on that it would also interfere with some aftermarket intakes.  We try to take common Fiesta ST parts upgrades into consideration so that the products we make will fit all Fiesta STs. The consensus was that because there was a bit more room further forward in the engine bay to relocate the catch can, that would be the way to go.

    Bracket and Hose Setup

    With this new location in mind our engineers began fabricating a

    Continue Reading »
  2. Keep your intake clean - Oil Catch Can R&D, Part 1: Introduction and Fabrication

    Keep your intake clean - Oil Catch Can R&D, Part 1: Introduction and Fabrication

    So far this Fiesta ST has had an interesting life with Mishimoto. The very same day that we drove it off the lot, it was rolled into our development facility and fitted for its first modification: a prototype baffled catch can kit. Why did we chose to begin with this? From our experience with other EcoBoost equipped vehicles, we know how prone these engines are to blow-by and carbon buildup. If you want to read more in depth about the benefits of a catch can, check out our complete write up on Blow-By 101. Installing a catch can right away allows us to protect the engine of our new development vehicle and gives us more time for data collection as we work on developing additional Fiesta ST parts. Last, but certainly not least of all, we asked for your feedback and received an overwhelming response to create a Fiesta ST catch can (yes we do listen to you!).

    Continue Reading »