Tag Archives: 2.3

Enhance Your EcoBoost Exhaust! Cat-Back Development, Part 5: Sound Testing

With just a couple small tasks to go, we’re near the completion of this 2015 Mustang cat-back exhaust project. Our design for this system is complete from the downpipe connection to the end of the stainless exhaust tips.

3D Models

Our prototype exhaust meets our requirements for both fitment and performance, so it was time to create a 3D-model of our design, which would ensure that our manufactured exhausts match our design exactly. After some time at the computer screen working in Solidworks, we ended up with the awesome renderings below! Mishimoto 2015 Mustang EcoBoost … <a href=Continue Reading ››

Enhance Your EcoBoost Exhaust! Cat-Back Development, Part 4: Tip Fabrication

We’ve logged some miles (and smiles) during the testing of our two cat-back exhaust setups. We’ve decided on a strategy for the muffler selection, one that we feel best suits the tones of the Mustang EcoBoost (EB). Our team determined that the round muffler setup is just a touch too loud, and that the oval mufflers shown in the previous segment provided the exact sound we are seeking. Months of tedious design and testing have resulted in drone-less operation on the highway, improved volume at wide-open-throttle( WOT), and stock-like sounds during light/partial throttle. I am sure you guys are eager for … Continue Reading ››

Mustang EcoBoost Aluminum Radiator R&D, Part 3: Final Prototype and Testing Data

Interested in purchasing this awesome aluminum radiator? Check out more details on our product page linked below!

Mishimoto Ford Mustang EcoBoost Performance Aluminum Radiator

We’re back with another prototype! After fitting our first unit, we found a few areas of our design that required minor adjustments to fulfill our goals of perfect fitment and optimal heat transfer. Our new 2015 Mustang EcoBoost parts are nearly complete!

Final Prototype

As noted in our previous article regarding the EcoBoost Mustang (EBM) radiator, we wanted to make modifications to both the core and our lower mounting brackets. These were easy changes, and we now … Continue Reading ››

Mustang EcoBoost Aluminum Radiator R&D, Part 2: First Prototype

Interested in purchasing this awesome aluminum radiator? Check out more details on our product page linked below!

Mishimoto Ford Mustang EcoBoost Performance Aluminum Radiator

It has been ages since we’ve had an update on our EBM aluminum radiator, and for good reason. Our team has been hard at work putting together a functional prototype for some initial test fitting. We used dimensions from the stock base model radiator, the performance package radiator, as well as measurements from the vehicle to ensure our prototype would fit and function with all factory components. Our line of 2015 Mustang EcoBoost parts is continually growing … Continue Reading ››

Enhance Your EcoBoost Exhaust! Cat-Back Development, Part 3: Prototype 2 & 3 Testing

The search continues to find the optimal blend between a high-quality WOT (wide-open throttle) exhaust sound and a rich sound during normal driving and light-throttle driving situations. In this segment, we continue with our 2015 Mustang exhaust sound testing to see if we find our second or third prototype setup pleasing.

Dyno Testing

We set up our EB on the Dynapack for some more sound collection. We also kept an eye on power output and AFR readings to see if power changed on the factory tune, and to see if the improved flow would impact AFRs in any way. On our 2015 … Continue Reading ››