Tag Archives: autocross

Mishimoto 2015 Subaru WRX Direct-Fit Baffled Oil Catch Can System, Part 1: Product Introduction

Interested in purchasing our WRX catch can kit? Check out more details on our product page linked below!

Subaru WRX Baffled Oil Catch Can System

If you follow our engineering blog or are involved with any of our social media outlets, you should be well aware of the new baffled oil catch can we recently released. This new product features a much smaller footprint compared to our existing catch can, allowing for fitment in tighter engine bays. In case you missed it, check out the full build at the link below. http://engineering.mishimoto.com/?cat=124 While developing this catch can, we wondered about using it … Continue Reading ››

Mishimoto 2015 Subaru WRX Performance Aluminum Radiator, Part 2: Evaluation of First Prototype Radiator

Interested in purchasing our 2015 WRX aluminum radiator? Check out our product page for more information!

Mishimoto Subaru WRX Performance Aluminum Radiator

Now that we had our first prototype unit in, it was time to evaluate fitment and determine if any changes were necessary when compared to the stock unit. First, we swapped the shrouds to see if any fitment issues existed because of the added size of the Mishimoto unit.
Mishimoto prototype 1 (right) fan shroud fitment
Mishimoto prototype 1 (right) fan shroud fitment
Continue Reading ››

Mishimoto 2015 Subaru WRX CVT Transmission Fluid Cooler, Part 4: Prototype 3 Development and Final Results

Interested in purchasing our WRX transmission cooler? Check out our product page for more information!

Mishimoto Subaru WRX CVT Transmission Cooler

For our third prototype unit for the CVT cooler, we decided to take a more traditional approach. We would place the cooler in a location that would guarantee airflow. The main concern was fitting our large 19-row cooler in a position that would not leave any space for other aftermarket components. First, we mocked-up the cooler and developed some basic brackets that would place the cooler in an angled position behind the upper grille area. Check out a few shots … Continue Reading ››

Mishimoto 2015 Subaru WRX Performance Aluminum Radiator, Part 1: Product Introduction and Stock Radiator Overview

Interested in purchasing our 2015 WRX aluminum radiator? Check out our product page for more information!

Mishimoto Subaru WRX Performance Aluminum Radiator

The new 2015 WRX is a great toy for both daily use and as a weekend track warrior. The introduction of the FA20DIT into the WRX chassis has been well received, and from the reviews thus far, Subaru has done a great job with the new model. Although some might disagree with the styling, overall the car handles and performs very well. As for value, the 2015 model is a pretty decent bang for your buck. For those looking … Continue Reading ››

Mishimoto 2015 Subaru WRX CVT Transmission Fluid Cooler, Part 3: Prototype 2 Development and Testing

Interested in purchasing our WRX transmission cooler? Check out our product page for more information!

Mishimoto Subaru WRX CVT Transmission Cooler

After we witnessed reasonable performance gains with our first prototype, we decided to evaluate what we liked and didn’t like with the design. Pros
  • Short line lengths
  • Efficient cooling
  • Compact design and packaging
Cons
  • Did not achieve the temperature decreases we wanted to see
  • Requires wiring of the electric fan
  • Airflow was not as sufficient as it could be
This first design was efficient but not ideal for what we wanted out of the project. To obtain the desired cooling benefits, the addition of an electric fan was necessary. … Continue Reading ››