Tag Archives: built ford tough

The Mustang GT Intake R&D, Part 4: Seeing is Believing

Click here to get your Mustang GT Intake!

As 2016 approaches its end, I can’t help but reminisce. It’s been a wild ride and a lot has changed. We have a new president-elect, the Olympics took place in Brazil, Kim Kardashian was robbed at gunpoint, Ryan Lochte lied about being robbed at gunpoint, and Leo finally got his Oscar. You know what hasn’t changed? Our resolve to make awesome parts for our automotive community. It was May 3 when we announced that we were going to make an intake for the 2015 Ford Mustang GT. … Continue Reading ››

The Mustang GT Intake R&D, Part 3: Data Crunch

It may seem that we have been dormant on this project, but trust me, the activity around this 2015 Mustang GT intake could not be more alive! In this update, I’ll outline the results of the extensive R&D we put this prototype through. Our Mustang’s V8 Coyote motor has spent a lot of time running with this our prototype intake, and we wanted to document the many steps along the way of this research. Our engineers believe they have tweaked this product to its full potential. So let’s dive right in! The GT looks … <a href=Continue Reading ››

Cooler Than Winterfell – Intercooler R&D, Part 1: Stock System Review

George R.R. Martin isn’t the only author who can write some gripping stuff about the cold. That’s right, brace yourselves, winter is coming; and we are jumping into the frigid waters which we know well – improved intercooler performance. The patient going underneath our scalpel for R&D is the 2013+ Ford Focus ST, but per our usual process, let’s first take a brief second to examine the stock system.
Our Ford Focus ST intercooler on our surgical table
Our Ford Focus ST intercooler getting inspected
Ford decided to use tube-and-fin construction for … Continue Reading ››

Bye-Bye Blow-By – Catch Can R&D, Part 2: Road Testing

We have had some radio silence with this F150 catch can project, but we now have some updates that we are ready to spill! This has been an interesting project from the beginning. The bulk of time has mainly consisted of road testing; we’ve logged thousands of miles so far, and every single mile counts. Let’s backtrack a bit. When we began this project, we intended to see what a dual-can setup would accomplish. In the last update we explained the benefit of having … Continue Reading ››

Upgrading Induction – Induction Hose R&D, Part 2: From Concept to Reality

We are now one step closer to completing this induction project! The bulk of our testing is just about finished and we have gotten some awesome results. One of our biggest objectives was to increase the internal volume over the stock intake. With more air surging through the hose, the potential for improved power output is increased as well.
Prototype 3D printed 2015+ Mustang parts
Prototype 3D printed 2015+ Mustang parts
The sound imposer is blocked off here, but it will be deleted!Continue Reading ››