catchcan

If you remember from our last post about the Titan XD catch can, we ran into some challenges with the first and second prototypes. Since then we have perfected our design, so without further delay, let's look at our final prototype for testing.

Final Prototype

With the check engine light vanquished, our last update left us with a slightly different hurdle to climb. A buildup of condensation in the system had us a tad worried about possible freezing in the winter. Little did we know that the solution was right in the Titan's engine bay. One of the benefits of working on a larger truck is that there is more room under the hood to work with. We used this to our advantage and decided to relocate the can to another spot in the engine bay - one that would see more heat. The idea is that extra heat introduced to the catch can will burn off a good deal of the moisture and prevent freezing of the can. A fine theory, but let's see it in practice.

If you remember from our last post about the Titan XD catch can, we ran into some challenges with the first prototype. Since our existing catch can design did not agree with the Titan, it was back to the drawing board for our lead engineer, Dan.

Updated Design

Our standard catch can when installed on the Titan was generating a code causing the truck to go into limp mode. The cause of the code stemmed from our standard catch can being too restrictive for the Titan's beefy Cummins engine. This is not surprising, given the 50 micron filter and smaller design of the can, which was originally designed for gasoline-powered cars. This catch can design functions beautifully on smaller turbo engines such as the Focus and Fiesta, as well as larger American V8s in the new-generation Camaro SS and Mustang GT. It just might not be suitable for the turbo diesel V8 in our

The Focus RS is a big hit at the Mishimoto headquarters, and we want to make sure to protect our newest addition. If you missed Kyle Mohan testing out the Focus RS drift mode, check out our Focus RS Drift Video. Luckily one of the first projects up to bat is our direct-fit baffled oil catch can. We know that the necessity of an oil catch can is a hotly debated topic among many car communities, and the Focus RS is no exception. From previous projects and research online, we've learned that blow-by is a real presence in these EcoBoost engines.

Focus RS Oil Catch Can R&D

Here at Mishimoto, we know the importance of a good catch can as far as preventative maintenance goes. For most vehicles, installing a catch can means protecting your engine from the silent monster that is blow-by. Blow by can consist of excess oil, fuel, moisture, and pure evil. Engines with direct-injection, like our good friend the Titan XD, are prone to blow-by creeping its way back into the engine through the intake, and caking debris on valves which can be very harmful to an engine over time. To read more in depth about blow-by, check out our complete write up on Blow-By 101.

Stock Titan XD engine bay

Not to worry gentle Titan, we are here to

Last time we took a look at the passenger-side catch can setup for our brand-new Mustang GT. We will still be making more improvements to our original design going forward, but the main location will stay the same. Now onto our driver-side catch can development!

Driver-side Mustang catch can bracket installed

Driver-side Mustang catch can installed

The driver-side catch can was a bit more difficult to place than the

The 2016 Mustang GT has arrived at Mishimoto, and we are wasting no time in developing products for Ford's newest version of the Pony car. We decided to begin with a version of our baffled oil catch can specifically designed to be direct-fit with the Mustang GT.

Stock Mustang Parts

You would be doing your Coyote a favor by installing some type of catch can for preventative maintenance. Some feel that a catch can is not a necessity until you introduce forced induction, which may be the case. On the other hand every ounce of blow-by collected in a catch can is an ounce that is not heading back into your intake to kill fuel mileage, buildup on valves, and increase the risk of detonation. To read more about the benefits of a catch

After removing both catch cans for data collection in our previous post, we discussed the idea of relocating the bracket that holds the PCV catch can to a different area in the engine bay. We mentioned earlier that we were toying with the idea because the current location of the Fiesta ST catch can raised some concerns. One of them being that the current location for the catch can would interfere with right-hand drive (RHD) applications of the Fiesta ST, and we want this catch can to be all inclusive. In addition, it came to our attention later on that it would also interfere with some aftermarket intakes.  We try to take common Fiesta ST parts upgrades into consideration so that the products we make will fit all Fiesta STs. The consensus was that because there was a bit more room further forward in the engine bay to relocate the catch can, that would be the way to go.

Bracket and Hose Setup

With this new location in mind our engineers began fabricating a

So far this Fiesta ST has had an interesting life with Mishimoto. The very same day that we drove it off the lot, it was rolled into our development facility and fitted for its first modification: a prototype baffled catch can kit. Why did we chose to begin with this? From our experience with other EcoBoost equipped vehicles, we know how prone these engines are to blow-by and carbon buildup. If you want to read more in depth about the benefits of a catch can, check out our complete write up on Blow-By 101. Installing a catch can right away allows us to protect the engine of our new development vehicle and gives us more time for data collection as we work on developing additional Fiesta ST parts. Last, but certainly not least of all, we asked for your feedback and received an overwhelming response to create a Fiesta ST catch can (yes we do listen to you!).