Tag Archives: fr-s

2013+ Subaru BRZ / Scion FR-S Performance Induction Hose, Part 1: Product Introduction and Goals

Interested in purchasing our BRZ induction hose? Check out our product page for more information!

Mishimoto Silicone Induction Hose For Subaru BRZ / Scion FR-S

The BRZ/FR-S is one of the hottest cars to hit the track in the past few years, and the Mishimoto engineers decided to do what they do best: cool it down. Naturally, we would be developing a performance aluminum radiator and silicone hose kit. Additionally we ended up with a killer direct-fit oil cooler kit, some very slick oil caps, and a low-temperature thermostat. As you may have seen in our other build-log, we are also … Continue Reading ››

2013+ Subaru BRZ / Scion FR-S Performance Cold-Air Intake, Part 4: Final Product Testing and Additional Data Collection

Interested in purchasing our BRZ intake? Check out our product page for more information!

Mishimoto Subaru BRZ / Scion FR-S Performance Cold-Air Intake

We know you've been dying to know how we finish up creating a cold-air intake, and today is the day you can breathe a sigh of relief. We are finally at the last stage of R&D! After constructing a final prototype we were prepared to test fitment and ensure that power output and AFR readings remained unchanged. Check out our final prototype components! Mishimoto BRZ/FR-S intake pipe final prototype Continue Reading ››

2013+ Subaru BRZ / Scion FR-S Performance Cold-Air Intake, Part 3: Initial Prototype Testing and Data Collection

Interested in purchasing our BRZ intake? Check out our product page for more information!

Mishimoto Subaru BRZ / Scion FR-S Performance Cold-Air Intake

Mishimoto BRZ/FR-S intake dyno testing Welcome back! It's test-time at Mishimoto, and we're going to put our dyno through a workout to shed those pounds it put on over the winter.  In our previous post we reported on the development of prototypes for our intake pipe, filter location, and mass air flow (MAF) housing. We decided it would be beneficial to test the effects of various MAF housing sizes on … Continue Reading ››

2013+ Subaru BRZ / Scion FR-S Performance Cold-Air Intake, Part 2: Initial Product Design

Interested in purchasing our BRZ intake? Check out our product page for more information!

Mishimoto Subaru BRZ / Scion FR-S Performance Cold-Air Intake

With a general idea of our plans for this product, we set about removing all the necessary components so we could begin fabrication. Steve, one of our bright engineers, would be taking the helm for this particular project, with others lending a hand throughout the process when needed. Steve handling the TIG work
FR-S components removed
FR-S components removed
Our … Continue Reading ››

2013+ Subaru BRZ / Scion FR-S Performance Cold-Air Intake, Part 1: Product Introduction and Goals

Interested in purchasing our BRZ intake? Check out our product page for more information!

Mishimoto Subaru BRZ / Scion FR-S Performance Cold-Air Intake

These articles normally begin with a quick background of the vehicle in question, followed by some of the performance high points and pitfalls of the car. With this particular vehicle, this process is not necessary. If you are reading this, you probably already own a BRZ/FR-S, and/or you are well aware of the effect this vehicle has had on the automotive world. Autocross, track days, drifting, daily driving, even rally; the 86 has everything you need to really … Continue Reading ››