Tag Archives: fxt

Testing Results – The FXT Intake, Part 3

Last time we posted about this Forester XT intake project, we left you off with prototype fitment. Testing is now complete and we have some information to share.
IMG_0157r
Subaru Forester XT performance parts up for testing
Our initial goal for this project was to design a performance intake system that would deliver dyno proven power gains and while being safe to run on the stock tune. We designed a very similar system for the 2015+ WRX and achieved terrific results. The Forester XT has changes in the ECU, head design and cams, … Continue Reading ››

Prototype Fabrication and Fitment – The FXT Intake, Part 2

The progress on our intake system is coming along nicely for this Forester XT. We have created a pipe that will fit well with our airbox design and filter selection. Remember, our pipe is within the acceptable pipe diameter to run this system with a stock tune.

The Fabricated Prototype

Below are some shots of the system we plan to put on an FXT for testing. The routing for this tube will follow a more direct path from filter to turbo. This is especially helpful for when the car is sitting at idle with ambient air around the box. With a shorter … Continue Reading ››

Stock System Evaluation – The FXT Intake, Part 1

Exciting things are happening in the induction world here at Mishimoto. We have a 2014 Subaru Forester XT in for intake R&D. This AWD turbo Subaru comes with a 2.0L power-plant, giving an output of 253 hp from factory. It shares the same FA20 heart with its 2015+ WRX counterpart, so there are some similarities between the two.
IMG_9274r
Subaru forester parts under analysis

Stock System Review

The stock Forester XT intake system is somewhat similar to the stock WRX intake system, yet featured some differences in shape and size. With both … Continue Reading ››