Tag Archives: TitanXD

Cooling is Coming- Nissan Titan XD Intercooler, Part 2: Final Prototype

Preparation is an elusive concept. No matter how much time you spend getting ready, you find yourself at the event remembering everything you did not bring. Perhaps this applies more to me, the least prepared individual of all. I constantly find myself in situations where if I had prepared, I could have been ahead of the eight-ball rather than feeling like it was tumbling down a hill after me. For instance, I once showed up to a track day without a tire pressure gauge, rookie mistake. Since then, I have learned the merits of taking some extra time to be … Continue Reading ››

Conquering the Catch Can – Part 3: Final Prototype Testing

If you remember from our last post about the Titan XD catch can, we ran into some challenges with the first and second prototypes. Since then we have perfected our design, so without further delay, let’s look at our final prototype for testing.

Final Prototype

With the check engine light vanquished, our last update left us with a slightly different hurdle to climb. A buildup of condensation in the system had us a tad worried about possible freezing in the winter. Little did we know that the solution was right in the Titan’s engine bay. One of the benefits of working on … Continue Reading ››

Conquering the Catch Can – Part 2: Prototype Update

If you remember from our last post about the Titan XD catch can, we ran into some challenges with the first prototype. Since our existing catch can design did not agree with the Titan, it was back to the drawing board for our lead engineer, Dan.

Updated Design

Our standard catch can when installed on the Titan was generating a code causing the truck to go into limp mode. The cause of the code stemmed from our standard catch can being too restrictive for the Titan’s beefy Cummins engine. This is not surprising, given the 50 micron filter and smaller design … Continue Reading ››

Defending the Titan- Coolant Filtration Kit R&D, Part 2: Final Prototype

Last time, we took an in-depth look at coolant filtration kits and how they can benefit our Titan. We gave you a sneak peek at what the final bracket for the Titan XD coolant filtration kit will look like. If you missed out on that you can check out the whole post on our engineering blog.

Finalizing the brackets

These brightly colored brackets were created with the help of 3D printing. This is just one of our rapid prototyping techniques that helps us create accurate prototypes the first time around. This allows us to bring great-looking AND great-fitting products to you … Continue Reading ››

Cooling is Coming- Intercooler R&D, Part 1: Stock Evaluation

We have been working on the Titan XD for quite some time now. We have gone through a variety of products like the intercooler pipe kit, coolant filtration kit, and exhaust. Now we are down to the bread and butter of our Titan XD parts: the intercooler. When we begin projects, we like to start by evaluating the stock component and looking for areas where we can make improvements. The stock intercooler in the Titan is fairly sizeable and features cast aluminum end tanks, which we don’t normally see on stock intercoolers. Nissan has started off on the right foot with … Continue Reading ››