Back to top
Ford Focus ST Intercooler Pipe Kit, 2013–2018

Ford Focus ST Intercooler Pipe Kit, 2013–2018
Ford Focus ST Intercooler Pipe Kit, 2013–2018
Ford Focus ST Intercooler Pipe Kit, 2013–2018
Ford Focus ST Intercooler Pipe Kit, 2013–2018
Installation
Installation
Installation
Engineering
Engineering
Engineering

Regular Price: $444.40

Sale Price $355.95

Installation Difficulty

Bread Checkout
 
Add to Build List
  • Direct fit for the 2013–2018 Ford Focus ST
  • 8 hp/ 10 tq gains when combined with other Mishimoto Focus ST parts
  • 14% increase in volume over stock hot-side pipe
  • 10% increase in volume over stock cold-side pipe
  • 21% increase in flow over stock piping
  • Elliptical shape cold-side pipe to accommodate for larger Mishimoto radiator
  • Mandrel-bent aluminum hot-side piping
  • Available in polished or wrinkle black
  • Mishimoto Lifetime Warranty

Increase the flow of charged air in your 2013–2018 Ford Focus ST with the Mishimoto Performance Intercooler Piping Kit. The piping equipped on the 2.0L EcoBoost engine from the factory is riddled with bends, restrictive piping diameters, and degradation-prone materials, all of which slow the air to and from your intercooler, putting a strain on the Focus ST’s performance. We here at Mishimoto strive to free the flow of charged air in your sporty Focus.

To start, we removed the turbo muffler from the design of the hot-side stock piping, and reduced the amount of bends giving the airflow a more direct path from the turbo to the intercooler. On top of the reduction of bends, we increased the inner diameter of the piping to 2.5 inches, allowing for a 14% increase in volume and 26% greater flow over the stock equipment. The stock rubber connections have been replaced with sturdy silicone couplers to ensure solid connections between piping and intercooler.

The improvements don’t stop with the hot-side piping. The cold-side piping received an overhaul as well, replacing the degradation-prone rubber construction with 5 layers of durable silicone complete with heat-resistant fibers, ensuring that the cold-side airflow stays cool. For added support, the single section of piping is reinforced with steel wire, ensuring that it keeps its shape when under heavy load. Speaking of shape, the Mishimoto Performance Cold-Side Intercooler Pipe features an elliptical shape to accommodate the increased size of the Mishimoto Performance Radiator.

The result of adding the Mishimoto Performance Intercooler and Piping Kit to your 2013–2018 Focus ST in conjunction with the Mishimoto Performance Intake is a 21% increase in flow of the charged air through the system, and an additional 8 hp and 10 ft/lb of torque boost on top of intake and intercooler gains. The Mishimoto Performance Intercooler Kit is available in a polished finish or wrinkle black powder-coating, and is covered under the Mishimoto Lifetime Warranty.

Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

EVEN MORE COOL ITEMS

TECH SPECS

Installation Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

Purchase Includes (1) Aluminum Intercooler Pipe
(1) Silicone Pipe
(2) Silicone Couplers
(6) High-Torque Worm Gear Clamps
Mishimoto Lifetime Warranty

Cold-Side Intercooler Pipe Specs 2.5" Inner Diameter

Hot-Side Intercooler Pipe Specs 2" Inlet
2.5" Outlet

Engineering Blog

Completing the Package – Intercooler Piping R&D: Coming in Hot

Completing the Package – Intercooler Piping R&D: Coming in Hot

July 31, 2017

Fresh off the assembly line comes our prototype intercooler pipes for the 2013+ Ford Focus ST. In the last update, I reviewed the stock piping, our 3D printed prototypes, and mildly teased what the final version of this kit will look like, so it’s time for a full reveal. Let’s go through some of the … Continue reading Completing the Package – Intercooler Piping R&D: Coming in Hot →

Read More 

Completing the Package – Intercooler Piping R&D, Part 1: Already Halfway There

Completing the Package – Intercooler Piping R&D, Part 1: Already Halfway There

June 23, 2017

The 2013+ Focus ST begs for more power. While it isn’t the easiest thing to accomplish, our engineers are here to help give you quality parts that will help push your ST to and over the edge of high performance. As our release for our Performance Intercooler sits on the horizon, there’s no better time … Continue reading Completing the Package – Intercooler Piping R&D, Part 1: Already Halfway There →

Read More 

blogload

FREQUENTLY ASKED QUESTIONS

Be the first to ask a question!
See how Mishimoto pushes the limits
Push the limits with Mishimoto