- Direct fit for the 2003–2007 Ford 6.0L Powerstroke
- Replaces clogged or leaking stock oil cooler for renewed performance
- Included high-quality FKM seals and O-rings ensure a leak-free fit
- Combine with the Mishimoto 2003–2007 6.0L Powerstroke Coolant Filter Kit to help protect your new oil cooler from cooling system debris
- Mishimoto Lifetime Warranty
Oil is the lifeblood of an engine, and in a hardworking diesel engine like the 2003–2007 6.0L Powerstroke, keeping that oil cool is essential to the engine's health and running.
The stock 2003–2007 Powerstroke liquid-to-liquid oil cooler uses engine coolant to draw heat away from the oil and vent it through the engine radiator. It’s a stout design that typically performs well for daily driven trucks. However, after over 12 years of service, many of those stock coolers have seen better days.
A clogged or leaking oil cooler can reduce the oil's ability to transfer heat to the coolant, causing thinning and a loss of protection for critical engine components. That’s why Mishimoto is proud to offer a stock replacement 2003–2007 Ford 6.0L Powerstroke oil cooler. This replacement cooler, complete with new seals and o-rings will restore your 6.0L Powerstroke’s oil cooling and protect your engine from unnecessary wear.
This cooler is a direct fit and provides all the cooling a daily driven 6.0L needs at an affordable price point. For even more protection, check out our 2003–2007 Ford 6.0L Powerstroke Coolant Filter Kit.
Like all Mishimoto 6.0L Powerstroke products, this stock replacement oil cooler is backed by our Mishimoto Lifetime Warranty for a lifetime of worry-free driving.
(1) Mishimoto Stock Replacement Oil Cooler
(1) EGR Cooler Supply Cover Gasket
(3) Oil Filter Base O-Rings
(2) Oil Filter Base Gaskets
(1) Oil Cooler Gasket
(6) Oil Cooler O-Rings
(1) Oil Pump Inlet Strainer
Mishimoto Lifetime Warranty
Professional installation of this product is highly recommended. Please see factory service manual for removal and installation instructions.Many oil cooler failures are caused by clogged coolant passages. These clogs prevent heat transfer between the oil and coolant. Mishimoto recommends flushing the vehicle’s coolant when replacing the oil cooler and installing a coolant filter kit to prevent future clogging.
- TECH SPECS
SKU MMOC-F2D-03 Also Fits Ford Excursion (6.0L Powerstroke) 2003-2005
Ford E-350 (6.0L Powerstroke) 2004-2010
Ford E-450 (6.0L Powerstroke) 2004-2010
Ford F-250 (6.0L Powerstroke) 2003-2007
Ford F-350 (6.0L Powerstroke) 2003-2007
Ford F-450 (6.0L Powerstroke) 2003-2007
Ford F-550 (6.0L Powerstroke) 2003-2007
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!