- Direct fit for the 2015–2020 BMW F8X M3, M4, and M2 Competition
- Kit includes oil line fitting kit, along with oil cooler adapters for use of nylon braided lines
- Full aluminum TIG-welded construction
- 46% increase in core volume
- Increases oil capacity by .44 quarts
- Robust bar-and-plate construction for improved durability and heat rejection
- Silver powder-coated finish for maximum protection
- Application-specific nylon braided hoses with -10AN fittings
- No cutting or modifications required
- Mishimoto Lifetime Warranty
Add some much-needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Oil Cooler kit. True to form, the BMW engineers designed the M3/M4's oil cooler with efficient space use in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the lightweight, tube-and-fin cooler in harm's way of road hazards.
We here at Mishimoto made sure to beef up the entire oil cooling system design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminum, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down and where it should be. We also added 10mm to the core's thickness, equating in a 46% increase in core volume, and increased the oil capacity by .4 qt.
In addition we wanted to add an extra degree of protection to the system by improving on the lines. From the factory, these vehicles are equipped with unforgiving hardlines that are prone to abrasion and corrosion damage. Our oil cooler kit provides a pair of application-specific, flexible, and robust nylon braided lines for a more secure channel for your M's oil. Also included are our specially designed adaptors allowing for AN fittings from the S55's oil pump and a secure connection to the oil cooler.
The Mishimoto 2015-2020 BMW M3/M4 Oil Cooler Kit fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.
(1) Oil Cooler
(1) 1ft, 10in Nylon Braided hose with 45° and 70° -10AN Fittings
(1) 3ft, 3in Nylon Braided Hose with 45° and 90° -10AN Fittings
(2) Application Specific Oil Cooler Adaptors
(1) Braided Line Separator Bracket
Mishimoto Lifetime Warranty
- TECH SPECS
Engine Codes S55 Chassis Codes F80
Material 6061 Aluminum Caution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact firstname.lastname@example.org. Overall Height 7" Overall Length 29.2" Overall Width 1.6" Core Size 25.8" x 6.3" x 1.5" Also Fits 2015–2018 BMW M3 Sedan
2015–2020 BMW M4 Coupe
2015–2020 BMW M4 Convertible
2016 BMW M4 GTS Coupe
2019–2020 BMW M4 CS Coupe
2019-2020 BMW M2 Competition
Braided Hoses True
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!