38 g of oil on filter
2006–2011 Honda Civic Si
Heat Shield Material
INSTALLATION TORQUE SPECS
22 in-lbs (2.5N*M) recommended for all worm-gear clamps.
These clamps have an operating range of 18-27 in-lbs 2-3N*M.
Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
Mishimoto recommends that his intake is not used with the stock ECU programming. It is highly recommended that the customer retune the vehicle's ECU after installing the intake. Power gains will vary depending on the type of ECU tune that is applied to the vehicle.
8 hp and +6 tq at 6200RPM
(1) Aluminum Intake Pipe with CNC MAF Flange
(1) Silicone Intake Coupler
(1) High-Flow, Oiled Filter
(1) Heat Shield w/ Protective Edging
(2) 60-80mm Worm Gear Clamps
(1) 16-25mm Worm Gear clamp Hardware
Mishimoto Lifetime Warranty