- 40-micron bronze filter blocks oil from depositing in ventilation system
- Specially engineered inlet pattern increases air turbulence to improve oil separation
- Internal baffle ensures no oil escapes during high-speed cornering
- Replaceable single-unit filter is easy to maintain
- Inlet and outlet accept -AN fittings for various configurations
- 100% billet anodized 6061 aluminum with laser etched finish
- Safe to use in pressurized systems
- Drain plug can be removed to allow for -AN return to oil pan
- Unique upper mounting bracket cogs provide versatile mounting options
- Includes push-on fittings for easy installation
Mishimoto is proud to announce the release of our Baffled Oil Catch Can. With over a year of research and development time, Mishimoto has created the most effective oil catch can on the market. The Mishimoto Baffled Oil Catch Can was designed to separate oil particles from the PCV air that would normally have just been routed back to your intake. Custom grooves in the catch can's inlet increases air turbulence ensures all the oil sinks to the bottom of the can, leaving nothing but clean air to pass through the 40-micron bronze filter to the intake. An internal baffle keeps the collected oil from splashing around under race conditions.
The 100% billet, 6061 aluminum can accepts -AN fittings at the inlet, outlet, and drain area allowing over 27 possible configurations. For maximum fitment options, the top cog mounting setup allows the can to be mounted from multiple angles. To make maintenance easy, the drain plug can be removed to allow for -AN return to the oil pan. The can is also 100% washable, unlike many other cans that require you to replace your filtration system.
The Mishimoto Baffled Oil Catch Can is available in a variety of colors and, as with all our catch cans, comes with the unparalleled Mishimoto Lifetime Warranty you know and trust.
Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.
(1) Black, Anodized 6061 Aluminum Catch Can
(2) Aluminum Mounting Brackets
(1) Bronze Filter
(1) Internal Baffle
(3) Dowty Oil Seals
(2) Push-on Fittings
(1) Drain Plug
(6) Black Rubber Oil Line
(4) Worm Gear Clamps
(1) Black Rubber Band
Mounting Hardware & Brackets
Mishimoto Lifetime Warranty
Click here http://www.mishimoto.com/mishimoto-transmission-coolers-oil-coolers.html#5 to view optional fittings and lines.* Drain plug is attached to the internal baffle and if it is replaced, the internal baffle may not be usable again.
- TECH SPECS
Overall Height 6" Overall Diameter 3.06" Inlet M20 x 1.5 (for accepting -10AN) Outlet M20 x 1.5 (for accepting -10AN) Drain Plug Thread Size M20 x 1.5 * Capacity 9 fl oz Assembled Weight 1.6 lbs Material 6061 Aluminum Color Black Baffled True
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!