Cooler Construction Stacked-plate
No dashes = M20 x 1.5 -- M20 x 1.5
2 dashes = 3/4" -16UNF -- 3/4" -16UNF
Install Torque Specs
Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact email@example.com.
12.91" x 2.81"
(1) 10-Row Oil Cooler (Silver or Black)
(1) 4ft Stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting
(1) 5ft stainless Steel Braided Hose w/ -10AN fittings -- One straight fitting and one 90 degree swivel fitting
(1) M20 Thermostatic Sandwich Plate (Non-Thermostatic Available)
(2) -10AN Fittings
(2) Dowty Oil Seals
(1) Large O-Ring
(2) 1/8" NPT Allen Key Plugs
(2) Sandwich plate adapters
Mishimoto Lifetime Warranty
Sandwich Plate Fittings
FREQUENTLY ASKED QUESTIONS
Thanks for the message!
We would suggest to have at least an extra 0.5 quart of oil available when installing this kit onto your vehicle!
Please feel free to contact us directly at firstname.lastname@example.org if you have any additional questions!