Performance Air Intake, fits Subaru BRZ / Scion FR-S 2013+
Performance Air Intake, fits Subaru BRZ / Scion FR-S 2013+
MISHI POINTS INFO
Get exclusive points discounts ONLY for #TeamMishi Rewards Program account holders. Join to earn reward points on every dollar you spend at mishimoto.com. Click here for our terms and conditions.
- Direct fit for the 2013+ Subaru BRZ and Scion FR-S
- Provides 7 whp / 5 wtq gains while maintaining A/F ratios with no additional tuning
- No bumper removal required and installs in under 30 minutes
- Designed to fit with the Mishimoto BRZ / FR-S Oil Cooler Kit and Mishimoto Oil Fill Cap
- Black powder-coated airbox keeps unwanted hot air from entering the air filter
- Wrinkle black aluminum intake pipe includes CNC-machined MAF housing and air straightener
- Fully serviceable oiled air filter provides 16-percent increase in filter surface area compared to the stock filter
- Improves engine tone
- Smooth design eliminates restrictions and improves airflow
- Available with a black, blue or red silicone induction hose
- Designed in Delaware, USA and filter made in USA
- Mishimoto Lifetime Warranty
- CARB EO number: D-759-3
Installation Difficulty: Medium
CARB EO#: D-759-3 - Direct fit for the 2013+ Subaru BRZ and Scion FR-S
- Provides 7 whp / 5 wtq gains while maintaining A/F ratios with no additional tuning
- No bumper removal required and installs in under 30 minutes
- Designed to fit with the Mishimoto BRZ / FR-S Oil Cooler Kit and Mishimoto Oil Fill Cap
- Black powder-coated airbox keeps unwanted hot air from entering the air filter
- Wrinkle black aluminum intake pipe includes CNC-machined MAF housing and air straightener
- Fully serviceable oiled air filter provides 16-percent increase in filter surface area compared to the stock filter
- Improves engine tone
- Smooth design eliminates restrictions and improves airflow
- Available with a black, blue or red silicone induction hose
- Designed in Delaware, USA and filter made in USA
- Mishimoto Lifetime Warranty
- CARB EO number: D-759-3
Product Description
The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16% increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty.
TECH SPECS
| Air Filter Part Number | MMAF-3006 |
|---|---|
| Filter Diameter | 2.75 |
| Chassis Codes | ZC6 ZN6 |
| Engine Codes | FA20 4U-GSE |
| Applications | 2013+ Subaru BRZ 2013+ Scion FR-S |
| Note | This kit was designed to fit with the Mishimoto BRZ/GT86 Oil Cooler Kit. Filter re-oil is not included with the lifetime warranty. |
Compatible Vehicles
Installation Guides
Downloads
Purchase Includes
(1) Airbox w/ Protective Edging
(1) High-Flow Oiled Filter
(1) Silicone Induction Hose
(1) Sound Generator Cap
(2) Worm Gear Clamps
Mounting Hardware
Mishimoto Lifetime Warranty
Note:
Filter re-oil is not included with the lifetime warranty.
Interested in purchasing our new BRZ/FR-S intake system? Check out more details on our product page linked below!
Subaru BRZ / Scion FR-S Performance Air Intake
After solidifying our product design we needed to capture data to verify the design and determine if any changes were necessary. We strapped our test vehicle to the dyno and began making pulls! Check out a compilation video from the dyno testing. The audible difference in intake tone and volume is quite noticeable when comparing the stock setup with the Mishimoto prototype.
Testing Results
On to the important part, results from our tests. Intake upgrades generally
Interested in purchasing our new BRZ/FR-S intake system? Check out more details on our product page linked below!
Subaru BRZ / Scion FR-S Performance Air Intake
We left off last time with an explanation of our intentions with this intake system and some initial design work to create an induction route to our planned airbox. Now it was time to finish designing this intake system so that testing could be conducted.
Airbox Fabrication
We started developing our airbox with simple metal fabrication. The plan was to put our idea into a physical object and then transfer this to a 3D model. Once in Solidworks, we could solidify the final design and features and use our 3D printer to construct a final prototype for test fitting.
Fabrication begins! A simple box was drawn up and templates printed for our bends and mounting point locations.
Interested in purchasing our new BRZ/FR-S intake system? Check out more details on our product page linked below!
Subaru BRZ / Scion FR-S Performance Air Intake
Another Intake?
Wait " Mishimoto already has an intake for the BRZ/FR-S. Why design a second one? As this question crosses your mind, we can provide a simple explanation.
We have had great success with our existing cold-air intake system for this chassis, and the feedback from our customer base has been fantastic.
After listening to our customers both directly and through web forums, we concluded that a second intake design was necessary for a completely different set of customers. Here are a few plans for our new design.
- Engine-bay mounted, stock-appearing airbox setup
- Easy installation and filter servicing
- Fits with Mishimoto
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
Frequently Asked Questions
