- Direct fit for 2018+ Subaru Crosstrek XV & 2017+ Impreza 2.0L
- Protects intake valves from power-robbing carbon buildup
- Helps prevent knock that could lead to ringland failure
- Catch can captures blow-by, preventing it from fouling the engine oil
- Installs in under an hour
- Abrasion guard on lines prevents wear and vacuum leaks
- Direct-fit bracket mounts the catch can away from engine vibration
- Sturdy 3mm-thick steel brackets withstand rough roads and off-road abuse
- Filters and can are fully serviceable
- Patent #US D884,760 S
- Mishimoto Lifetime Warranty
The 2018+ Subaru Crosstrek is one of the most versatile vehicles on the market today. It's an efficient grocery hauler, comfortable daily driver, and capable off-road adventure seeker. Like most Subarus, the Crosstrek was built to go the distance with its time-tested 2.0L flat-four FB20D engine, but the second-generation Crosstrek received an efficiency update that could threaten its longevity.
Direct injection lets the 2018+ Crosstrek sip fuel and crank out 33 mpg, but it also leaves the FB20D's intake valves vulnerable to carbon. As blow-by flows over the intake valves, oil and carbon deposits can build up, impeding airflow and eventually preventing the valves from closing. This blow-by can also cause knock that could result in catastrophic failure of the engine. The best way to treat this carbon buildup is to prevent it, and that's where this Mishimoto 2018+ Subaru Crosstrek direct-fit baffled oil catch can kit comes in.
This Mishimoto catch can kit diverts blow-by away from the intake and traps it in our catch can. Inside the can, a set of air turbulators and baffles separate fuel, oil, and water vapors from the crankcase gasses and collects them to be drained next time you change your oil. By not returning the blow-by to your oil pan, our kit prevents fouling of the oil that could reduce its effectiveness, leading to accelerated engine wear. Finally, a sintered bronze filter removes any remaining carbon from the crankcase gases so that only clean air returns to your intake.
If you want to keep your grocery-getting, daily-driven adventure seeker on the road for a long time to come, now is the time to protect it from carbon buildup. Like all of our Subaru products, this 2018+ Crosstrek catch can kit is backed by our Mishimoto Lifetime Warranty for a lifetime of protection.
(1) Direct-Fit Mounting Bracket
(1) 3 fl oz Black, Anodized 6061 Aluminum Catch Can
(2) CNC-Machined Aluminum Barbed Fittings
(2) Hoses w/ Pre-Installed Abrasion Guard
(4) Worm Gear Clamps
Mishimoto Lifetime Warranty
After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.
- TECH SPECS
Engine Codes FB20D Chassis Codes GT Fits 2018+ Subaru Crosstrek 2.0L
2017+ Subaru Impreza 2.0L
Inlet 3/8" Outlet 3/8" Capacity 3 fl. oz. Install Torque Specs 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!