- Direct fit for the 2008-2014 WRX and 2008-2019 STI
- Full aluminum construction including durable, TIG-welded end tanks
- Two-row, 1.65" thick brazed aluminum core
- Increased fluid capacity and optimal heat dissipation
- Provides efficient temperature reduction for use on the street, track, rallycross, or autocross course
- Includes 1.3 Bar High-Pressure Radiator Cap , which effectively raises the boiling point of engine coolant and provides a safer, more efficient system
- Includes Magnetic Drain Plug to capture any metallic debris/fragments in your cooling system
- Mishimoto Lifetime Warranty
The Mishimoto performance aluminum radiator for the WRX and STI is designed and engineered to maximize cooling efficiency by up to 30%, boost engine functions, and most importantly protect your car from overheating. It is the ideal upgrade to the stock Subaru radiator whether you drive your vehicle daily or take it for track runs. The Mishimoto WRX radiator features a lightweight dual core, 100% brazed aluminum, and polished end tanks, enhancing the overall performance of your engine. Every Mishimoto aluminum radiator is a direct fit, making installation effortless with no cutting or modification required. This radiator comes with a Mishimoto 1.3 Bar High-Pressure Radiator Cap and, like all our aluminum radiators, comes with the Mishimoto Lifetime Warranty.
Mishimoto Radiator Cap
Overflow Nipples - 2
Magnetic Drain Plug
Mishimoto Lifetime Warranty
This item is for Manual Transmission vehicles. For automatic applications, please purchase optional Mishimoto Universal Transmission Cooler Kit.Caution: The provided Mishimoto radiator cap should replace the stock cap located on the expansion tank. The stock cap attached to the radiator should be installed on the Mishimoto Performance Aluminum Radiator. The Mishimoto radiator cap is a two-way valve, while the stock radiator cap is a single valve. Due to the difference in construction, the Mishimoto cap cannot be used on the radiator. If the Mishimoto cap is fit on the radiator, overheating may occur.It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact email@example.com.Use small fitting for: 2008–2009 Subaru WRX 2008–2019 Subaru STIUse large fitting for: 2010–2014 Subaru WRX 2005–2009 Subaru Legacy GT 2005–2009 Subaru Outback XT 2009–2013 Subaru Forester XT
- TECH SPECS
Engine Codes EJ255
Chassis Codes GE
Fits 2008–2014 Subaru WRX
2008–2019 Subaru STI
2009–2013 Subaru Forester XT
2005–2009 Subaru Outback XT
2005–2009 Subaru Legacy GT
Material Aluminum Overall Height 21.8" DPI 13091/13093 Drain Plug Length 0.47" Drain Plug Thread Size (M12) x 1.5 Overall Length 28" Tank Wall Thickness 0.08" Outlet 1.54" Rows 2 Inlet 1.54" Coolant Capacity 2.21 Dual Pass False Overall Width 2.15" Core Length 27.08" Core Height 13.39" Core Thickness 1.65" Fill Neck 1.25" Overall Length (in) 21.80 Overall Height (in) 28.00 Overall Width (in) 2.15 Rows 2
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!