Enhance Performance with Top-Mount Intercooler for Subaru Ascent 2019+ & Legacy/Outback XT 2020+
Top-Mount Intercooler, fits Subaru Ascent 2019+ & Legacy/Outback XT 2020+
- Direct fit for 2019+ Subaru Ascent/2020+ Legacy XT and Outback XT
- Bar-and-plate core reduces restriction by 40.6 percent for improved efficiency
- 88 percent increase in core volume for improved cooling efficiency
- Lowers outlet temps to less than 10 degrees over ambient for safe performance
- 35.7 percent less pressure drop than stock means more boost makes it into the engine
- 76 percent increase in fin surface area for superior heat transfer
- Cold-side tank include 1/8-NPT port for boost or temp sensors
- Cast aluminum end tanks reduce failure points for high boost applications
- Includes everything needed for installation
- Black powder-coat finish matches any color scheme
- Mishimoto Lifetime Warranty
Installation Difficulty: Easy
- Direct fit for 2019+ Subaru Ascent/2020+ Legacy XT and Outback XT
- Bar-and-plate core reduces restriction by 40.6 percent for improved efficiency
- 88 percent increase in core volume for improved cooling efficiency
- Lowers outlet temps to less than 10 degrees over ambient for safe performance
- 35.7 percent less pressure drop than stock means more boost makes it into the engine
- 76 percent increase in fin surface area for superior heat transfer
- Cold-side tank include 1/8-NPT port for boost or temp sensors
- Cast aluminum end tanks reduce failure points for high boost applications
- Includes everything needed for installation
- Black powder-coat finish matches any color scheme
- Mishimoto Lifetime Warranty
Product Description
We've completely revamped the stock plastic end tank intercooler and replaced it with cast-aluminum end tanks and a high-flow core that's 88 percent larger than stock. The larger core volume allows our intercooler to flow over 40 percent better than stock, taking the strain off your turbo and allowing it to shove more cold air into your engine. We've also added 76 percent more fin surface area to the core, allowing it to transfer heat more effectively and keep outlet temps within 10 degrees of ambient. A pre-drilled, tapped, and plugged 1/8-NPT port allows you to easily add temp or boost pressure sensors.
This kit includes everything needed for installation and the black powder-coat finish matches any color scheme. With our Mishimoto Lifetime Warranty, you can go anywhere and do anything knowing your Subaru and Mishimoto have your back.
TECH SPECS
Applications | 2019+ Subaru Ascent H4 2.4L Turbo 2020+ Subaru Legacy XT H4 2.4L Turbo 2020+ Subaru Outback XT H4 2.4L Turbo |
---|---|
Engine Codes | FA24DIT |
Chassis Codes | VB |
Maximum Recommended Boost Pressure (PSI) | 100 |
Maximum Recommended Horsepower | 600 |
Overall Length (in) | 24.51 |
Overall Height (in) | 12.96 |
Overall Width (in) | 4.38 |
Core Type | Bar-and-Plate |
Core Thickness (in) | 4 |
Core Length (in) | 20.5 |
Core Height (in) | 7 |
Installation Notes | Upon removal of factory intercooler, inspect the OEM inlet gasket and replace with Subaru part number 21896AA150 if any areas appear damaged or warped. |
Compatible Vehicles
Installation Guides
Purchase Includes
Mishimoto Lifetime Warranty
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.

