(2) Silicone Hoses
(4) Worm-Gear Clamps
Mishimoto Lifetime Warranty
Installation Torque Specs
22 in-lbs (2.5N*M) recommended for all worm-gear clamps.
These clamps have an operating range of 18-27 in-lbs 2-3N*M.
Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
Heat-Resistant Embedded Fibers
Outer Diameter Hose 1: 1.65” (42mm) Hose 2: 1.89” (48mm)
Inner Diameter Hose 1: 1.26” (32mm) Hose 2: 1.50” (38mm)
FREQUENTLY ASKED QUESTIONS
Thank you for reaching out to us here at Mishimoto.
This hose kit will, in fact, fit both the base Corvette with the LS3 as well as the Z06 with the LS7.
If you have any further questions please feel free to contact us at firstname.lastname@example.org