Ford 6.7L Powerstroke Intercooler Pipe and Boot Kit, 2017+
If you’re paying with PayPal, your charge will be processed immediately. For credit cards, you’ll also be charged right away, but the charge will appear as a hold; no actual transfer of funds occurs until we ship your order.
We know quality is your priority, and it’s ours too. We’re working tirelessly to engineer the best product possible, but occasionally, delays may occur. In the event of a delay, we will keep you up-to-date on the timing of your new product.
For our international customers and those outside the continental US (Alaska and Hawaii), orders may take longer and international shipping charges may apply. Please contact us if you have specific questions regarding your order.
If you’ve got any further questions or concerns about your pre-sale order, our customer service team is here to help!
Thanks for your order!
Mishimoto has developed an intercooler pipe and boot kit for the 2017+ 6.7L Powerstroke for customers looking to upgrade both cold-side and hot-side intercooler pipes at the same time! Upgrade to the Mishimoto kit for increased reliability, durability, and performance.
The pipes are constructed of mandrel bent aluminum with a polished finish and eliminate restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. The engineers at Mishimoto designed CNC-machined quick-disconnect flanges and IAT sensor housing to allow for an easy install in less than two hours. This intercooler pipe and boot kit is direct fit, retaining all factory emissions components and does not require the use of a tuner.
This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power.
This pipe and boot kit is the perfect addition to the Mishimoto 6.7L Powerstroke Performance Primary Radiator. It is made in the USA and includes the Mishimoto Lifetime Warranty.
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
Installation Torque Specs
27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
(1) Aluminum Intercooler Pipe w/ CNC Quick-Disconnect Flange(1) Aluminum Intercooler Pipe w/ CNC Quick-Disconnect Flange, O-Ring, and Spring Clip (1) Aluminum Intercooler Pipe w/ CNC IAT Sensor Housing (1) Aluminum Intercooler Pipe (4) Silicone Boots with DuraCore™ Technology (8) Constant Tension T-Bolt Clamps Mishimoto Lifetime Warranty
This intercooler pipe and boot kit will not fit with our 2011-2016 Ford 6.7L Powerstroke intercooler. For a complete intercooler and pipe kit for 2017+ models, please see our 2017+ Ford 6.7L Powerstroke Intercooler Kit.Mishimoto has improved this product by including an O-ring and spring clip for the cold-side pipe. If you did not receive these components with your kit, contact our Customer Service Team or remove the stock O-ring and spring clip and install them onto your Mishimoto CNC-machined coupling.The stock O-ring and spring clip must be re-used with the hot-side pipe.
2.75" (Hot-Side Turbo Section) 3.0" (Hot-Side Intercooler Section)2.65" (Cold-Side Intercooler Section) 3.5" (Cold-Side Butterfly Valve Section)
Constant Tension T-Bolt Clamps Specs
(1) 3.0" Constant Tension T-Bolt Clamps(6) 3.25" Constant Tension T-Bolt Clamps (1) 4.0" Constant Tension T-Bolt Clamp
Silicone Boots With DuraCore Specs
Boot 1: 2.75” to 3.00” Boot 2: 3.00” Boot 3: 2.65" to 3.00" Boot 4: 3.00" to 3.50"
2017+ Ford F-250 w/ 6.7L Powerstroke 2017+ Ford F-350 w/ 6.7L Powerstroke 2017+ Ford F-450 w/ 6.7L Powerstroke 2017+ Ford F-550 w/ 6.7L Powerstroke
Question will be displayed after moderation.
By creating an account with our store, you will be able to move through the checkout process faster, store multiple shipping addresses, view and track your orders in your account and more.
If you have an account with us, please log in.
* Required Fields