Material 6061 Aluminum

Core Height 5.43"

Rows 19

Cooler Construction Stacked-plate

Note Requires modification to factory transmission cooler lines.

Core Thickness 1.97"

Core Length 11"

Fitting Size (2) 45° -10AN to 3/8" Barbed Push-On Fittings
(2) Brass 90° Barbed Push-On Fittings

Engine Codes EGH (3.8L)

Chassis Codes JK

Install Torque Specs 22 in-lbs (2.5N*M) recommended for all worm-gear clamps.
These clamps have an operating range of 18-27 in-lbs 2-3N*M.
Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.

Caution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, click here to contact us http://www.mishimoto.com/contact.html

Increase In Oil Capacity 0.65 qt

Overall Height 12.95"

Overall Length 6.44"

Overall Width 1.97"

Core Size 11.0" x 5.43"

Inlet -10AN

Outlet -10AN

Purchase Includes (3) Application Specific Mounting Brackets
(1) 19-Row Oil Cooler
(1) 6ft Black Rubber 3/8" Transmission
(2) 45° -10AN to 3/8" Barbed Push-On Fittings
(2) Brass 90° Barbed Push-On Fittings
(6) Worm Gear Clamps
(1) Mounting Hardware Set
Mishimoto Lifetime Warranty

Also Fits 2007-2011 Jeep Wrangler
2007-2011 Jeep Wrangler Unlimited