- High-flow fan provides 1300 cfm of airflow
- Universal fitment
- Compact design with a diameter of 14" and an overall thickness of only 2.65" provides increased engine bay space
- Mishimoto Lifetime Warranty
This curved blade fan can be used as an upgrade to the OEM fan for more efficient cooling or fitment issues with aftermarket products. With its slim design, the fan can easily be installed flush against a radiator. For universal installation, use Mishimoto Universal Fan Mount Kit (P/N: MMFAN-MOUNT). Mishimoto recommends the use of a fan shroud and our fan mounting kit in addition to the included mounting tabs for a secure installation.
- TECH SPECS
Type of Ends Female Snap-Plug Terminal Material Plastic Air Temp While Tested 72°F Color BK Normal Current (amps) 7.8 Volts 12 Housing Diameter 14.75 Blade Diameter 326 Overall Thickness 2.5" Tech Specs and Sizing Click here for fan specifications and sizing chart. Reverse False Blade Style Straight Inrush Current (amps) 15.1 # of Blades 10 Fan RPM 2200 Fan Diameter 14 Overall Depth 67.5 CFM 1300 Kit Includes (1) Mishimoto Fan
(4) Mounting Tabs
Mishimoto Lifetime Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Q:Is this a push fan or a pull fan?A:
Thanks for the message!
Model number MMFAN-14, the 14" Mishimoto Slim Electric Fan can be wired to run as a pusher in addition to a puller.
In order to have this fan operate as a pusher, you would need to reverse the polarity of the wiring. That means the ground on the fan will go to the positive wire on the body harness. The positive on the fan will then connect to the ground on the chassis, or the ground wire in the harness.
We have developed an article on wiring fans into your vehicle. The link has been provided below.
Please feel free to contact us directly at email@example.com if you have any additional questions!
Pat MBY:Pat Muschamp (Admin) | May 12, 2017