X-Line Performance Aluminum Radiator, fits Subaru WRX/STI 2001-2007
X-Line Performance Aluminum Radiator, fits Subaru WRX/STI 2001-2007
- Large three-row aluminum core provides additional coolant capacity, substantial coolant surface contact, and optimal coolant temperatures even in the most demanding environments
- Industry-largest 2 inch thick core for ultimate cooling efficiency
- Full aluminum construction for increased durability
- Mishimoto Lifetime Warranty
Installation Difficulty: Medium
- Large three-row aluminum core provides additional coolant capacity, substantial coolant surface contact, and optimal coolant temperatures even in the most demanding environments
- Industry-largest 2 inch thick core for ultimate cooling efficiency
- Full aluminum construction for increased durability
- Mishimoto Lifetime Warranty
Product Description
TECH SPECS
Overall Height (in) | 28.4 |
---|---|
Overall Length (in) | 17.2 |
Overall Width (in) | 2.5 |
Core Length (in) | 13.54 |
Core Height (in) | 27.24 |
Rows | 3 |
Inlet (in) | 1.5 |
Outlet (in) | 1.5 |
Core Thickness (in) | 2 |
Drain Plug Thread Size | M12 x 1.5 |
DPI | 2703 |
Applications | Saab 9-2X H4 (2.0L) 2005 Saab 9-2X H4 (2.5L) 2006 Subaru WRX H4 (2.0) 2002-2005 Subaru WRX H4 (2.5) 2006-2007 Subaru WRX STI H4 (2.5) 2004-2007 |
Engine Codes | EJ205 EJ255 EJ257 |
Chassis Codes | GD |
Note | This item is for Manual Transmission vehicles. For automatic applications, please purchase optional Mishimoto Universal Transmission Cooler Kit. The provided Mishimoto radiator cap should replace the stock cap located on the expansion tank. The stock cap attached to the radiator should be installed on the Mishimoto Performance Aluminum Radiator. The Mishimoto radiator cap is a two way valve, while the stock radiator cap is a single valve. Due to the difference in construction, the Mishimoto cap cannot be used on the radiator. If the Mishimoto cap is fit on the radiator, overheating may occur. Due to the additional thickness of our 3-row X-Line radiator, trimming the upper hose may be necessary. For 2002-2003 Subaru WRX models built before 7/2002, remove fill neck overflow nipple and replace with 1.5875mm NPT plug provided. |
Compatible Vehicles
Purchase Includes
Mishimoto Radiator Cap
1/16-inch NPT Plug
Fan Mounting Hardware
Magnetic Drain Plug
Mishimoto Lifetime Warranty
Note:
This item is for Manual Transmission vehicles. For automatic applications, please purchase optional Mishimoto Universal Transmission Cooler Kit.The provided Mishimoto radiator cap should replace the stock cap located on the expansion tank. The stock cap attached to the radiator should be installed on the Mishimoto Performance Aluminum Radiator. The Mishimoto radiator cap is a two way valve, while the stock radiator cap is a single valve. Due to the difference in construction, the Mishimoto cap cannot be used on the radiator. If the Mishimoto cap is fit on the radiator, overheating may occur.
Due to the additional thickness of our 3-row X-Line radiator, trimming the upper hose may be necessary.
For 2002-2003 Subaru WRX models built before 7/2002, remove fill neck overflow nipple and replace with 1.5875mm NPT plug provided.
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.