Get exclusive points discounts ONLY for #TeamMishi Rewards Program account holders. Join to earn reward points on every dollar you spend at mishimoto.com. Click here for our terms and conditions.
The Subaru WRX is a car that begs to be driven at ten-tenths, and as enthusiasts, we're happy to oblige. At the same time, we know the WRX is capable of much more with a few well-designed upgrades. One upgrade that's sure to bring your 2022+ WRX to the next level is the Mishimoto performance top-mount intercooler. This top mount intercooler lets your FA24 breathe all the cool boost it could ever want.
The crowning jewel of this kit is our massively upgraded top-mount intercooler and shroud. We've completely revamped the plastic end tank intercooler and replaced it with cast-aluminum end tanks and a high-flow core that's 88 percent larger than stock. The larger core volume allows our intercooler to flow over 40 percent better than stock, taking the strain off your turbo and allowing it to shove more cold air into your engine. We've also added 76 percent more fin surface area to the core, allowing it to transfer heat more effectively and keep outlet temps within 10 degrees of ambient. All those improvements would be for not, though, if we didn't have a way to get cool outside air over the intercooler. To do that, we scaled the intercooler shroud up to expose the entire core to fresh air from the WRX's signature hood scoop. A pre-drilled, tapped, and plugged 1/8-NPT port allow you to easily add temp or boost pressure sensors.
This kit includes everything needed for installation, including new shroud hardware. It's available in 19 different custom powder coat colors, including 3 OEM equivalent colors, to match any color scheme and, with our Mishimoto Lifetime Warranty, you can drive your WRX at ten-tenths knowing Mishimoto has your back.
Read more
TECH SPECS
More Information
Applications
Subaru WRX H4 2.4L Turbo 2022+
Engine Codes
FA24DIT
Chassis Codes
VB
Note
Each individual order is powder coated on demand, therefore there will be an extended timeframe (Up to 20 days) between order placement and actual shipment. Tracking information will be provided upon order shipment after coating. Please review your color selection carefully and contact us immediately at 1.877.GOMISHI if you need to make changes to your order. Any changes to your order must be made within 1 business day of the original order.
Returns will not be accepted on any items within our Custom Color program.
All "OEM Color Equivalent" finishes have been carefully selected by our team. These coatings are not exact matches due to differences between powder coat and liquid paint. Our team has verified that the color equivalents we offer are a very close match to the OEM paint
Maximum Recommended Boost Pressure (PSI)
100
Maximum Recommended Horsepower
600
Overall Length (in)
24.51
Overall Height (in)
12.96
Overall Width (in)
4.38
Core Type
Bar-and-Plate
Core Thickness (in)
4
Core Length (in)
20.5
Core Height (in)
7
Installation Notes
Upon removal of factory intercooler, inspect the OEM inlet gasket and replace with Subaru part number 21896AA150 if any areas appear damaged or warped.
Each individual order is powder coated on demand, therefore there will be an extended timeframe (Up to 20 days) between order placement and actual shipment. Tracking information will be provided upon order shipment after coating. Please review your color selection carefully and contact us immediately at 1.877.GOMISHI if you need to make changes to your order. Any changes to your order must be made within 1 business day of the original order.
Returns will not be accepted on any items within our Custom Color program.
All "OEM Color Equivalent" finishes have been carefully selected by our team. These coatings are not exact matches due to differences between powder coat and liquid paint. Our team has verified that the color equivalents we offer are a very close match to the OEM paint
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
{{/image.url}}
{{^image.url}}
{{/image.url}}