Get exclusive points discounts ONLY for #TeamMishi Rewards Program account holders. Join to earn reward points on every dollar you spend at mishimoto.com. Click here for our terms and conditions.
Key Features
Features
Direct fit for 2011+ Ford F-150 2.7L/3.5L EcoBoost and 5.0L
Anodized billet 6061 aluminum construction
Robust 3mm-thick steel bracket ensures a sturdy mounting point in a serviceable location
Helps reduce carbon buildup on intake valves
Protects intake system and essential engine components by capturing oil blow-by in the PCV system
Application-specific pre-molded hoses fit with stock engine cover
Includes factory-style quick-disconnect fittings for easy and secure installation
Helps maintain proper octane levels to reduce potential detonation
Internal air diverter increases air turbulence to improve oil separation
Simple and quick installation with basic hand tools
Carbon buildup is an enemy of any motor, and the Mishimoto Direct-Fit Oil Catch Can system for your 2011+ Ford F-150 is the defense. Modern vehicles use a PCV, or “Positive Crankcase Ventilation”, system to capture the vapors that escape past the piston rings into the crankcase of your engine and recirculate them back into the intake system to be burned again. While this is much better for the environment, it’s not as great for your engine. In doing so, these vapors carry remnants of oil and unburned fuel, which make their way into your intake system, causing multiple problems.
The first and largest problem is that the oil particles being carried in these vapors coat your intake system, including the intake manifold and intake valves. Over time, this will gum up and turn into carbon buildup. Direct-injection engines, like the EcoBoost, are especially prone to severe carbon buildup on the intake valves. The second issue is that those oily vapors being introduced back into the cylinder during combustion can reduce the overall octane rating of the fresh fuel being provided, causing pre-detonation and knocking.
This is where the Mishimoto Direct-Fit Oil Catch Can system comes into play. By installing our catch can in line with your PCV system, the 50-micron bronze filter captures those oily particles and allows them to condense until they become heavy enough to drip into the canister to be collected instead of flowing back into your engine. This leaves the air flowing back into your intake system clean and ready to be burned again. The catch can mounts with a sturdy 3-mm thick steel bracket in a convenient and serviceable location, allowing you to easily empty the waste oil. The pre-molded hoses with factory style quick-disconnects make installation a breeze, and even fit with the factory engine cover. As with all our products, this catch can is backed by our signature Mishimoto Lifetime Warranty.
Read more
TECH SPECS
More Information
Applications
2011+ Ford F-150 2.7L EcoBoost 2011+ Ford F-150 3.5L EcoBoost 2011+ Ford F-150 5.0L V8
Engine Codes
2.7L EcoBoost 3.5L EcoBoost 5.0L Coyote
Material
6061 Aluminum
Installation Notes
22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM).
Note
Does not fit supercharged 5.0L applications.
After installation, Mishimoto recommends checking the contents of the catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal air diverter.
This kit cannot be used in conjunction with MMBCC-F150-11PBE, if you have the 5.0L engine MMBCC-F150-11PBE is a more direct fit for 2011-2014 F150 models.
After installation, Mishimoto recommends checking the contents of the catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal air diverter.
This kit cannot be used in conjunction with MMBCC-F150-11PBE, if you have the 5.0L engine MMBCC-F150-11PBE is a more direct fit for 2011-2014 F150 models.
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
{{/image.url}}
{{^image.url}}
{{/image.url}}