- Direct fit for 2015–2016 Ford F-150 3.5L EcoBoost
- 24% total internal volume increase over the stock intercooler pipes
- Cold-side pipe includes CNC quick-disconnect with pre-installed O-ring and spring clip for quick and easy installation
- Additional port on cold-side pipe can be drilled and tapped for methanol injection or sensors
- Includes Mishimoto Silicone Boots with DuraCore™ technology for superior resistance to heat, pressure, fuel, and oil
- Constant-tension worm gear clamps keep a strong grip as pipes and boots expand and contract
- 10°F (5.5°C) reduction in intake air temp
- 77% increase in internal intercooler core volume
- 163% increase in external fin surface area
- All-aluminum, TIG-welded construction
- Fits with stock intercooler fans without modification
- Intercooler available in Sleek Silver or Stealth Black, pipes available in polished or wrinkle black powder-coated finish
- Mishimoto Lifetime Warranty
Mishimoto has developed a direct-fit 2015–2016 3.5L F-150 EcoBoost Intercooler & Pipe kit that allows owners to maximize the performance potential of their F-150.
Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore™ technology. The 24% larger volume of our pipes allows your 2015–2016 3.5L F-150 EcoBoost to breathe free and make the most of its two turbochargers. DuraCore™ boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination.
Combine our piping with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 3.5L EcoBoost engine is capable of. Our intercooler increases core volume by 77% over stock and external fin surface area by 163%. With cast end tanks and bar-and-plate construction, our intercooler combines strength and power for an all-around upgrade over stock.
This kit is available with a black or silver intercooler and wrinkle black or polished pipes. As with all Mishimoto products, this 2015–2016 3.5L F-150 EcoBoost Intercooler & Pipe kit is backed by our Lifetime Warranty.
(1) Mishimoto Intercooler w/ Assembled Rubber Trim
(1) Bypass Valve Bracket
(1) Aluminum Cold-Side Intercooler Pipe w/ CNC Quick-Disconnect Flange
(1) Aluminum Cold-Side Intercooler Pipe w/ CNC IAT Sensor Housing
(5) Aluminum Hot-Side Intercooler Pipes
(9) Silicone Boots w/ DuraCore™ Technology
(18) Constant-Tension Worm Gear Clamps
Bypass Valve Hardware
Mishimoto Lifetime Warranty
- TECH SPECS
Engine Codes 3.5L EcoBoost Chassis Codes P552 Fits 2015-2016 Ford F-150 3.5L EcoBoost
Installation Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M). Core Thickness 4.7" Coating Powder Coated Tank Wall Thickness 0.157" Max Rec. PSI 50 psi Outlet 3.0" Core Length 19.6" Core Height 9.4" Inlet 2.5" Overall Width 7" Overall Height 9.5" Overall Length 29" Construction Bar-and-plate
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!