- Direct fit for the Hyundai Genesis Coupe 3.8
- 37 degree temperature drop
- Custom adapter allows use of spin-on filter
- Minimal pressure loss
- Thermostatic option available
- Stealth black and sleek silver cooler options
- Lifetime Warranty
Mishimoto is proud to announce our new direct-fit oil cooler kit designed specifically for the 2010-2012 Hyundai Genesis Coupe with 3.8L V6! High oil temperatures lead to rapid oil degradation that can result in increased engine wear and potential failure. Protect your street or track Genesis by installing the Mishimoto oil cooler kit for efficient temperature regulation. This kit includes a precision-engineered, CNC-machined aluminum oil filter housing, which replaces the factory housing and canister filter. This allows for the use of an oil sandwich plate and a conventional spin-on filter. The Mishimoto oil cooler kit includes preassembled lines and an efficient 19-row oil cooler that mounts in the front grille for optimum airflow and cooling capability. This oil cooler kit increases overall oil capacity by .75 qt and is proven to reduce temperatures by 37 degrees F while maintaining minimal pressure drop. This kit is available with a thermostatic sandwich plate for additional oil temperature control, and your choice of a stealth black or silver cooler. As with all our products, this kit includes the Mishimoto Lifetime WarrantyPlease note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at email@example.com if you have any questions.
(1) Application Specific Mounting Bracket
(1) 19-Row Oil Cooler
(1) 2ft 7in Stainless Steel Braided Hose w/ -10AN Fittings
(1) 3ft 3.5in Stainless Steel Braided Hose w/ -10AN Fittings
(1) Oil Sandwich Plate
(1) 6061 Aluminum CNC Oil Filter Housing, Black
(1) Stainless Steel Sandwich Plate Adapter, M20
(2) Straight Fittings M20 x -10AN, Black
(2) 1/8" NPT Plugs
(1) Large O-ring
(2) Small Factory-style O-rings
(1) Mounting Hardware Set
Mishimoto Lifetime Warranty
This product requires the use of an oil filter for the Hyundai Genesis 2.0T
- TECH SPECS
Engine Codes 3.8L Lambda V6 Chassis Codes BK38
Material 6061 Aluminum Core Height 5.43" Rows 19 Cooler Construction Stacked-plate Core Thickness 1.97" Core Length 11" Fitting Size -10AN Pressure Drop 3-4 PSI Install Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs. Caution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact firstname.lastname@example.org Increase In Oil Capacity 0.65 qt Temp Difference 37°F Also Fits 2010-2012 Hyundai Genesis 3.8
2010-2012 Hyundai Genesis 3.8 GT
2010-2012 Hyundai Genesis 3.8 Grand Touring
2010-2012 Hyundai Genesis 3.8 Track
2010-2012 Hyundai Genesis 3.8 R-Spec
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!