Get exclusive points discounts ONLY for #TeamMishi Rewards Program account holders. Join to earn reward points on every dollar you spend at mishimoto.com. Click here for our terms and conditions.
Key Features
Features
Direct fit for 2015-2017 Ford F-150 2.7L EcoBoost
Dual-can setup captures blow-by from both the PCV and CCV systems
CCV side accommodates stock pressure sensor for CEL-free running
In-line check valve prevents can from being pressurized under boost.
Application-specific lines fit with stock engine cover
3mm thick steel bracket won’t bend, rattle, or break under heavy abuse
Turbocharging and direct-injection are quickly becoming the go-to method for building powerful and efficient trucks. However, if not carefully maintained, they can also mean the end for your 2015-2017 Ford F-150 2.7L EcoBoost. Direct injection makes the 2.7L EcoBoost one of the most efficient engines ever fitted to the F-150. But, without the benefit of fuel washing over the back of the intake valves, blow-by is free to accumulate in the form of carbon deposits. Eventually, those carbon deposits can choke your engine and reduce its performance. Thankfully, Mishimoto has a solution. Mishimoto's 2015-2017 Ford F-150 2.7L EcoBoost Catch Can Kit protects your intake tract and valves from the harmful effects of blow-by and carbon accumulation. The dual-can setup ensures that blow-by is routed away from your intake and valves and is captured in our road-proven, baffled catch cans. Whether you're hard on the throttle or cruising around town, these cans have your engine's back. The 3mm thick steel bracket is strong enough to handle any terrain a work truck or daily driver will see and the included quick-disconnect fittings make installation a breeze. Of course, this catch can kit is backed by our Mishimoto Lifetime Warranty so you can rest easy knowing your 2015-2017 F-150 2.7L EcoBoost is protected from blow-by for as long as you own it.
Read more
TECH SPECS
More Information
Applications
2015-2017 Ford F-150 2.7L EcoBoost
Engine Codes
2.7L EcoBoost
Installation Notes
22 in-lbs (2.5NM) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in- 2-3NM. Do not exceed the maximum torque rating of 27 in-lbs (3NM).
Note
After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.
(1) Application-Specific Mounting Bracket (2) Black, Anodized 6061 Aluminum Catch Cans (5) Direct-Fit Hoses with pre-attached quick-disconnect fittings (4) Metal Barbed Fittings (2) Bronze Filter (2) Air Diverter (2) Internal Baffle Rod (2) 3/8-in NPT Plug (2) Large O-Ring (6) Worm Gear Clamps 0Mounting Hardware Mishimoto Lifetime Warranty
Note:
After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
