- Direct fit for the 2011–2014 Ford F–150 3.5L EcoBoost
- 41% greater internal volume than stock
- 10% greater flow than stock
- 2.5" Aluminum intercooler pipes replace weak stock plastic pipes
- No trimming of the engine cover or modifications necessary for installation
- Includes all boots necessary for easy installation, including couplers to the intercooler
- Includes Mishimoto Silicone Boots with DuraCore™ technology for superior resistance to heat, pressure, fuel, and oil
- Max gains of +15whp/+21wtq when using Mishimoto's full kit
- Available in polished or wrinkle black powder-coated finish
- Mishimoto Lifetime Warranty
The Mishimoto 2011–2014 F–150 EcoBoost Hot–Side Intercooler Pipe Kit is an ideal upgrade in reliability and performance. The Mishimoto kit features polished aluminum or wrinkle black piping accompanied by silicone couplers with DuraCore™ technology. Engineered to eliminate restrictive bends, this hot–side pipe kit increases average airflow by 10% and internal volume by 41% when compared to stock. The DuraCore™ couplers provide superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our couplers by preventing leaks and blowouts. To add even more reliability, Mishimoto's Constant Tension T–bolt clamps are included for an accurate and secure installation.
Pairing this kit with our Mishimoto 2011–2014 F–150 EcoBoost Cold–Side Intercooler Pipe kit gives your truck the efficient, unimpeded airflow it needs to make up to 15 more horsepower and 21 ft/lbs more torque. To further improve your charge–air system, combine this pipe kit with the Mishimoto 2011–2014 F–150 EcoBoost performance intercooler. Of course, this kit is backed by our Mishimoto Lifetime Warranty, so you never need to worry about buying another intercooler pipe kit again.
(3) Aluminum Intercooler Pipes
(5) Silicone Boots w/ DuraCore™ Technology
(2) High Torque Worm Gear Clamps
(8) Constant Tension T-Bolt Clamps
Mishimoto Lifetime Warranty
- TECH SPECS
Make Ford Engine Codes T - 3.5L V6 EcoBoost Chassis Codes P415 Fits 2011-2014 Ford F-150 3.5L EcoBoost
2015-2017 Ford Expedition 3.5L EcoBoost
2015-2017 Lincoln Navigator 3.5L EcoBoost
Installation Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M). Silicone Couplers 5 Pipe Diameter 2.5" Constant Tension T-Bolt Clamps Specs 8 Outlet 2.36" Inlet 2.1"
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!