Back to top
Ford Focus RS Intercooler Pipe Kit, 2016–2018

Ford Focus RS Intercooler Pipe Kit, 2016–2018
Ford Focus RS Intercooler Pipe Kit, 2016–2018
Ford Focus RS Intercooler Pipe Kit, 2016–2018
Ford Focus RS Intercooler Pipe Kit, 2016–2018
Ford Focus RS Intercooler Pipe Kit, 2016–2018
Installation
Installation
Installation
Installation
Packaging
Packaging
Packaging
Engineering
Engineering
Engineering
Engineering

Regular Price: $540.80

Sale Price $432.95

Installation Difficulty

Bread Checkout
 
Add to Build List
  • Direct fit for the 2016–2018 Ford Focus RS
  • Silicone couplers absorb the stresses of excessive engine movement
  • Improves heat and pressure tolerance
  • 46% and 45% less pressure drop than stock cold–side and hot–side pipe, respectively
  • 31% and 40% increase in internal volume compared to stock cold–side and hot–side pipe, respectively
  • Both Mishimoto intercooler pipes and Mishimoto intercooler provide 35% less pressure drop than stock setup
  • Fits both stock and Mishimoto Focus RS intercooler
  • Designed to not block off cooling to the PTU
  • Mishimoto Lifetime Warranty

Reduce the restriction and add more volume to the flow of charged air in your 2016–2018 Ford Focus RS with the Mishimoto Performance Intercooler Piping kit. We have combined the power of our hot-side and cold-side kits to give you the best airways to and from the intercooler in your Focus RS.

Our cold-side pipe is a single section of durable 5-ply silicone, eliminating the need for additional couplers. The improved design is flexible enough to make installation a breeze, and is reinforced with steel wire to stand up to the same abuse as its aluminum counterpart. We have also increased the inner diameter of the cold-side pipe, equating to a 31% increase in internal volume and a 46% increase in flow over the stock piping. Our cold-side piping is available in black and its full potential is unlocked when combined with our hot-side kit.

Since the hot-side has more distance to travel, we incorporated a specially designed aluminum mid-section and united it with a pair of dependable silicone couplers, all to make sure your Mk.III RS keeps every precious PSI of boost contained in the system. On top of increasing the diameter to 2.5 inches, our hot-side piping is designed specifically to direct airflow to the front PTU cooler that would be blocked by a traditional piping design. Our air diverting hot-side pipe includes wire-reinforced, 5-ply silicone couplers to ensure a secure connection to the turbo and intercooler.

The Mishimoto Performance Intercooler Piping Kit is available in black and includes all the hardware needed for a fortified and direct fitment to your 2016–2018 Ford Focus RS. As with all our products, this kit also includes the Mishimoto Lifetime Warranty.

Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

EVEN MORE COOL ITEMS

TECH SPECS

Installation Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

Silicone Couplers 2

Purchase Includes (1) Hot-side Intercooler Pipe
(2) Silicone Couplers
(1) Wire-reinforced Silicone Hose
(4) T-bolt clamps
(2) High-Torque Worm Gear Clamps
Mishimoto Lifetime Warranty

Constant Tension T-Bolt Clamps Specs (4) 3" T-Bolt Clamps

Cold-Side Intercooler Pipe Specs 2.5"-2.75"

Hot-Side Intercooler Pipe Specs 2.5"

Engine Codes 2.3L EcoBoost GTDi I4

Chassis Codes MKIII

Fits 2016+ Ford Focus RS

Coating Powder Coated

Make Ford

Engineering Blog

Mission In-Pipe-Sible – Intercooler Piping R&D, Part 3: The Hot Side

Mission In-Pipe-Sible – Intercooler Piping R&D, Part 3: The Hot Side

June 08, 2017

I’ve said it before and I’ll say it again: paying attention to details is a crucial part of life. Leading professionals are gurus at doing so in their respective fields. A good chef can wade through the already heavy seasoning in something like a gumbo and tell if there is too much or too little … Continue reading Mission In-Pipe-Sible – Intercooler Piping R&D, Part 3: The Hot Side →

Read More 

Mission In-Pipe-Sible – Intercooler Piping R&D, Part 2: The Cold Side

Mission In-Pipe-Sible – Intercooler Piping R&D, Part 2: The Cold Side

January 26, 2017

Our intercooler pipes are on the tail end of our journey to extract some elevated performance out of our 2016 Ford Focus RS. Along with our intercooler project making great strides in development, we have some updates to share with you regarding our intercooler piping. In usual fashion, we plan to make … Continue Reading ››

Read More 

Mission In-pipe-sible – Intercooler Piping R&D, Part 1: Stock Review

Mission In-pipe-sible – Intercooler Piping R&D, Part 1: Stock Review

August 15, 2016

This hot hatch is heating up our headquarters! We have several projects in the works, so if you have not had a chance to check them out, you can do so on the Focus RS section of our engineering blog. Stock Focus RS intercooler piping Often, … Continue Reading ››

Read More 

blogload

FREQUENTLY ASKED QUESTIONS

Be the first to ask a question!
See how Mishimoto pushes the limits
Push the limits with Mishimoto