Fresh off the assembly line comes our prototype intercooler pipes for the 2013+ Ford Focus ST. In the last update, I reviewed the stock piping, our 3D printed prototypes, and mildly teased what the final version of this kit will look like, so it's time for a full reveal. Let's go through some of the design features and performance numbers that have resulted from this project.

Hot-side intercooler pipes

The hot-side kit will have a solid aluminum center section with silicone couplers attached to the turbo and intercooler outlet. It fits nicely around the engine oil pan and is mounted with brackets to keep it in place. However, a balance between flexibility and rigidity is important, which is why the couplers are long.

The 2013+ Focus ST begs for more power. While it isn't the easiest thing to accomplish, our engineers are here to help give you quality parts that will help push your ST to and over the edge of high performance. As our release for our Performance Intercooler sits on the horizon, there's no better time than the second official day of summer "17 to tell you Focus ST enthusiasts that we are also developing upgraded intercooler piping to compliment it, because, why stop there?

Underbody shot of the stock intercooler piping on a 2013 Ford Focus ST