Intercooler Pipe Kit, fits Ford Focus ST 2013-2018
MISHI POINTS INFO
Get exclusive points discounts ONLY for #TeamMishi Rewards Program account holders. Join to earn reward points on every dollar you spend at mishimoto.com. Click here for our terms and conditions.
- Direct fit for the 2013-2018 Ford Focus ST
- 8 hp/ 10 tq gains when combined with other Mishimoto Focus ST parts
- 14-percent increase in volume over stock hot side pipe
- 10-percent increase in volume over stock cold side pipe
- 21-percent increase in flow over stock piping
- Elliptical shape cold-side pipe to accommodate for larger Mishimoto radiator
- Mandrel-bent aluminum hot-side piping
- Available in polished or wrinkle black
- Mishimoto Lifetime Warranty
Installation Difficulty: Medium
CARB EO#: D-759-6 - Direct fit for the 2013-2018 Ford Focus ST
- 8 hp/ 10 tq gains when combined with other Mishimoto Focus ST parts
- 14-percent increase in volume over stock hot side pipe
- 10-percent increase in volume over stock cold side pipe
- 21-percent increase in flow over stock piping
- Elliptical shape cold-side pipe to accommodate for larger Mishimoto radiator
- Mandrel-bent aluminum hot-side piping
- Available in polished or wrinkle black
- Mishimoto Lifetime Warranty
Product Description
To start, we removed the turbo muffler from the design of the hot-side stock piping, and reduced the amount of bends giving the airflow a more direct path from the turbo to the intercooler. On top of the reduction of bends, we increased the inner diameter of the piping to 2.5 inches, allowing for a 14% increase in volume and 26% greater flow over the stock equipment. The stock rubber connections have been replaced with sturdy silicone couplers to ensure solid connections between piping and intercooler.
The improvements don't stop with the hot-side piping. The cold-side piping received an overhaul as well, replacing the degradation-prone rubber construction with 5 layers of durable silicone complete with heat-resistant fibers, ensuring that the cold-side airflow stays cool. For added support, the single section of piping is reinforced with steel wire, ensuring that it keeps its shape when under heavy load. Speaking of shape, the Mishimoto Performance Cold-Side Intercooler Pipe features an elliptical shape to accommodate the increased size of the Mishimoto Performance Radiator.
The result of adding the Mishimoto Performance Intercooler and Piping Kit to your 2013-2018 Focus ST in conjunction with the Mishimoto Performance Intake is a 21% increase in flow of the charged air through the system, and an additional 8 hp and 10 ft/lb of torque boost on top of intake and intercooler gains. The Mishimoto Performance Intercooler Kit is available in a polished finish or wrinkle black powder-coating, and is covered under the Mishimoto Lifetime Warranty.
TECH SPECS
| Applications | Ford Focus ST, 2013-2018 |
|---|---|
| Installation Notes | 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). |
Downloads
Purchase Includes
(1) Silicone Pipe
(2) Silicone Couplers
(6) High-Torque Worm Gear Clamps
Mishimoto Lifetime Warranty
Fresh off the assembly line comes our prototype intercooler pipes for the 2013+ Ford Focus ST. In the last update, I reviewed the stock piping, our 3D printed prototypes, and mildly teased what the final version of this kit will look like, so it's time for a full reveal. Let's go through some of the design features and performance numbers that have resulted from this project.
Hot-side intercooler pipes
The hot-side kit will have a solid aluminum center section with silicone couplers attached to the turbo and intercooler outlet. It fits nicely around the engine oil pan and is mounted with brackets to keep it in place. However, a balance between flexibility and rigidity is important, which is why the couplers are long.
The 2013+ Focus ST begs for more power. While it isn't the easiest thing to accomplish, our engineers are here to help give you quality parts that will help push your ST to and over the edge of high performance. As our release for our Performance Intercooler sits on the horizon, there's no better time than the second official day of summer "17 to tell you Focus ST enthusiasts that we are also developing upgraded intercooler piping to compliment it, because, why stop there?
Underbody shot of the stock intercooler piping on a 2013 Ford Focus ST
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
Frequently Asked Questions
