Oil Cooler Kit, fits Ford Mustang EcoBoost 2015-2017
Oil Cooler Kit, fits Ford Mustang EcoBoost 2015-2017
MISHI POINTS INFO
Get exclusive points discounts ONLY for #TeamMishi Rewards Program account holders. Join to earn reward points on every dollar you spend at mishimoto.com. Click here for our terms and conditions.
- Direct-fit for 2015-2017 Ford Mustang EcoBoost
- Reduces oil temperatures by up to 40 F (23 C)
- Minimal pressure drop
- Application-specific mounting bracket
- Premade braided stainless steel oil lines with durable -AN fittings
- Includes billet aluminum Oil Sandwich Plate or Thermostatic Oil Sandwich Plate
- 19-row stacked-plate oil cooler for optimal reduction in fluid temperature
- Thermostatic and non-thermostatic options available
- Cooler available in Sleek Silver and Stealth Black
- Increases oil capacity by 0.75 qt
- Mishimoto Lifetime Warranty
Installation Difficulty: Medium
- Direct-fit for 2015-2017 Ford Mustang EcoBoost
- Reduces oil temperatures by up to 40 F (23 C)
- Minimal pressure drop
- Application-specific mounting bracket
- Premade braided stainless steel oil lines with durable -AN fittings
- Includes billet aluminum Oil Sandwich Plate or Thermostatic Oil Sandwich Plate
- 19-row stacked-plate oil cooler for optimal reduction in fluid temperature
- Thermostatic and non-thermostatic options available
- Cooler available in Sleek Silver and Stealth Black
- Increases oil capacity by 0.75 qt
- Mishimoto Lifetime Warranty
Product Description
TECH SPECS
| Rows | 19 |
|---|---|
| Core Length (in) | 11 |
| Core Height (in) | 5.43 |
| Core Thickness (in) | 1.97 |
| Engine Codes | 2.3 EcoBoost |
| Chassis Codes | S-550 |
| Installation Notes | Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
| Caution | It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
| Note | To provide maximum airflow to the front of your vehicle and the EcoBoost oil cooler, Mishimoto suggests disconnecting the connector for the front shutter doors Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ft. Do not exceed the maximum torque rating of 35 ft-lb |
Compatible Vehicles
Installation Guides
Downloads
Purchase Includes
19-Row Oil Cooler
4-ft 3.5-in Stainless Steel Braided Hose with 45 and 120 -10AN Fittings
4-ft 10.5-in Stainless Steel Braided Hose with 90 and 120 -10AN Fittings
Oil Sandwich Plate
3/4 x 16 Stainless Steel Sandwich Plate Adapter
M20 x -10AN Straight Fittings
Mounting Hardware Set
Mishimoto Lifetime Warranty
Note:
To provide maximum airflow to the front of your vehicle and the EcoBoost oil cooler, Mishimoto suggests disconnecting the connector for the front shutter doorsRecommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ft. Do not exceed the maximum torque rating of 35 ft-lb
Interested in purchasing our Mustang EcoBoost oil cooler kit? Check out more details on our product page linked below!
Mishimoto Ford Mustang EcoBoost Oil Cooler Kit
Prototype Testing Equipment and Setup
Time for the fun part: product testing! Once we had the brackets mocked up, our lines in place, and our sandwich plate installed, it was time to install our sensors to collect data. We would be collecting both temperature and pressure data for the stock setup and for our installed kit. Check out a shot of our testing sensors installed!
Mishimoto temperature sensors installed
And then our sensor
Interested in purchasing our Mustang EcoBoost oil cooler kit? Check out more details on our product page linked below!
Mishimoto Ford Mustang EcoBoost Oil Cooler Kit
Second Prototype Fabrication
Thank you for joining us for Part 2 of our oil cooler development for the Ford Mustang 2.3L EcoBoost! Last time, we designed our first prototype and evaluated potential pitfalls. We are now prepared to develop a second design, with airflow as our primary target for improvement over the previous mounting position.
This time, we would be positioning the cooler in the center of the grille, in a horizontal orientation. This would ensure that the entire core is exposed to airflow during vehicle motion. Steve, the lead engineer for this project, grabbed some measurements from the vehicle, and began designing a few brackets in 3D. Using these dimensions, the templates were printed so we could fabricate
Interested in purchasing our Mustang EcoBoost oil cooler kit? Check out more details on our product page linked below!
Mishimoto Ford Mustang EcoBoost Oil Cooler Kit
Mishimoto 2015 Ford Mustang EcoBoost on dyno
Many of you have been following the video review series our team put together for our 2015 Ford Mustang EcoBoost PP. We were extremely excited to get this new vehicle into our shop to begin evaluating it for new product development. We searched for potential faults and areas where we thought additional cooling might be necessary. In one of our more recent videos, we highlighted some of the development taking place
Frequently Asked Questions
