Hot-Side Intercooler Pipe Kit fits Chevrolet Camaro 2.0T 2016+/Cadillac ATS 2013-2019
Hot-Side Intercooler Pipe Kit fits Chevrolet Camaro 2.0T 2016+/Cadillac ATS 2013-2019
- Direct fit for the 2016+ Chevrolet Camaro 2.0T/2013+ Cadillac ATS 2.0T
- Dyno-proven maximum gains up to 7 whp and 8 wtq on a stock tune
- 29-percent greater internal volume than stock
- 20-percent increase in flow
- Aluminum intercooler pipe replaces weak stock rubber pipe
- Utilizes stock quick-disconnect fittings for easy installation
- 2.25-in to 2.5-in mandrel-bent aluminum piping
- Includes Mishimoto silicone coupler and Mishimoto T-bolt clamps
- Available in polished and wrinkle black
- Mishimoto Lifetime Warranty
Installation Difficulty: Medium
- Direct fit for the 2016+ Chevrolet Camaro 2.0T/2013+ Cadillac ATS 2.0T
- Dyno-proven maximum gains up to 7 whp and 8 wtq on a stock tune
- 29-percent greater internal volume than stock
- 20-percent increase in flow
- Aluminum intercooler pipe replaces weak stock rubber pipe
- Utilizes stock quick-disconnect fittings for easy installation
- 2.25-in to 2.5-in mandrel-bent aluminum piping
- Includes Mishimoto silicone coupler and Mishimoto T-bolt clamps
- Available in polished and wrinkle black
- Mishimoto Lifetime Warranty
Product Description
Mishimoto's hot-side Camaro 2.0T intercooler pipe also features a CNC-machined connection flange to ensure a direct connection to the turbo. In addition, the hot-side pipe includes a durable silicone coupler and stainless steel T-bolt clamps to ensure a leak free connection. Installation can be completed without modification to the engine bay as it is compatible with the stock intercooler. The Mishimoto hot-side intercooler pipe is available in either wrinkle black or a polished finish, and like all our Camaro 2.0T performance parts, includes the Mishimoto Lifetime Warranty.
TECH SPECS
Applications | 2016+ Chevrolet Camaro 2.0T 2013-2019 Cadillac ATS 2.0T |
---|---|
Engine Codes | LTG |
Chassis Codes | Alpha |
Note | There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed and installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction. Please reference our installation video for additional information. |
Installation Notes | 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). |
Compatible Vehicles
Installation Guides
Downloads
Purchase Includes
(1) Aluminum Pipe w/ CNC-machined 2-bolt flange
(1) Quick-Disconnect Spring Clip
(1) 2.25-in to 2.5-in Silicone Transition Coupler
(1) 2.5-in T-bolt Clamp
(1) 2.75-ft T-Bolt Clamp
Mishimoto Lifetime Warranty
Note:
There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed and installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction. Please reference our installation video for additional information.
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.


Frequently Asked Questions




