BLOG CATEGORIES

Nissan 350Z Induction Hose 2003-2006

  1. Mishimoto Nissan 350Z Silicone Induction Hose Pre-Sale!

    Mishimoto Nissan 350Z Silicone Induction Hose Pre-Sale!

    PRE-SALE LINK

    R&D is complete and we've started producing our first batch of silicone induction hose kits!

    While this process takes place we are launching a discounted pre-sale for those interested in picking up this awesome induction hose.

    Check out the final details below and click the pre-sale link to check out our product page.

    MSRP: $150.00

    Pre-Sale Price: $79.95

    Expected Ship Date: 4/13/16

    • Direct fit for the 2003-2006 Nissan 350Z
    • Up to 4 whp / 6 wtq gains over the stock rubber induction hose
    • Installs in under 30 minutes
    • Fits with the stock air intake system or Mishimoto Performance Air Intake
    • Installs with no tuning necessary
    • 5-Ply Silicone construction for added durability and long service life
    • Silicone hose reinforced with steel rings to prevent collapse
    • Pre-installed CNC connector provides
    Continue Reading »
  2. 350Z Silicone Intake Hose R&D, Part 2: Test Fit and Testing

    350Z Silicone Intake Hose R&D, Part 2: Test Fit and Testing

    It's now time to test fit our prototype 350Z intake hose to verify fitment. If any changes are needed to enhance or ease the installation process, now is the time to do so.

    Mishimoto silicone 350Z intake hose installed
    Mishimoto silicone 350Z intake hose installed

    We have a slight adjustment to make on the length of the CCV hose connection, but otherwise, our 350Z intake hose mounted nicely.

    Mishimoto silicone 350Z induction hose installed
    Mishimoto silicone 350Z induction hose installed

    Dyno Testing

    Continue Reading »
  3. 350Z Silicone Intake Hose R&D, Part 1: Stock Hose and Silicone Prototype

    350Z Silicone Intake Hose R&D, Part 1: Stock Hose and Silicone Prototype

    We recently designed a performance intake system for the 2003-2006 Nissan 350Z. This included an airbox and filter that attaches to the end of the stock mass airflow (MAF) housing. Our results were positive in that we achieved a significant improvement in intake sound, and we increased power output by 10 whp and 13 wtq without any additional tuning.

    This project is not so much performance oriented but is intended to add reliability and additional aesthetic appeal to the intake system on the Z.

    To start this project, we rolled our test vehicle into our development facility and started inspecting the stock piece. Check out our test subject.

    350Z intake hose test vehicle
    350Z intake hose test vehicle

    Continue Reading »