air-oil separator

Though the winter continues to perpetuate chilly weather and monotonous gloom here on the east coast, the future is looking bright for our Mishimoto 2013+ Cadillac ATS catch can kit. After a nice visit to the local Porsche dealership (yes, you read that correctly), armed with some anomalous 50◦ January sunshine, several delicious sandwiches, and our final ATS prototype catch can kit, we've determined that our fitment is just about spot on.

For those of you just catching up with us now (I crack myself up), this ATS kit is largely the same as our Camaro 2.0T catch can kit, which is now on pre-sale"don't worry, the ATS pre-sale is not far behind!

However, to properly fit the Caddy, we needed to design a bespoke set of ATS-specific brackets and hoses.

You may have seen an earlier post detailing the ultra-high-tech way we laid out the initial designs, and that method proved to be an effective one. The layout we determined through those methods was mapped onto a 3D-drawing, and we used that

Happy 2017, people! I hope you all had wonderful experiences throughout the holiday season and you welcomed in the New Year with a glass of something delicious. I know I did! Whatever you had, I'm sure you enjoyed it much more than your Camaro 2.0T enjoys drinking blow-by. So to begin the year on the right foot, we're going to give you the opportunity to pick up a Mishimoto 2016+ Camaro 2.0T Catch Can kit.

In my last post, I gave all of the ATS owners a little love and showed you how we route catch can hoses with our loaner Cadillac. Today, it's time to pivot back and take a look at the final setup as it will appear on the Camaro 2.0T. We've been working on a surprise addition to this design that you might want to check out.

Most everything that you read here will also apply to the ATS kit, but, as many have inferred, the Camaro project is a little bit further along in R&D than the Cadillac project (although not by THAT much). The Camaro kit is so close to ready, in fact, that it is now