BLOG CATEGORIES

Forced induction

  1. Intercooler Sandwich - 2015+ VW MK7 GTI/Golf R, Audi A/S3 Intercooler R&D Part 1 - Stock Review

    Intercooler Sandwich - 2015+ VW MK7 GTI/Golf R, Audi A/S3 Intercooler R&D Part 1 - Stock Review

    The Golf GTI has been one of the most revered hot hatchbacks since its inception in the mid-1970s. While it was immediately a hit in Europe, and especially the UK, we didn't get the chance to experience Volkswagen's ingenious combination of efficiency and speed until the early 80's with the "Rabbit" GTI. The MK1's screaming 98 horsepower engine boasting Bosch's latest fuel injection technology, combined with crisp and responsive suspension, was enough to draw in a huge following. With that following came an explosion in aftermarket parts for these vehicles, from wheels to lowering kits, and just about any other trick to squeeze every drop of performance from the naturally aspirated motors equipped through the next two generations.

    Continue Reading »
  2. Ultimate Cooling - 2012-2016 BMW F2X/F3X Intercooler R&D Part 2 - Design Plans

    Ultimate Cooling - 2012-2016 BMW F2X/F3X Intercooler R&D Part 2 - Design Plans

    When I last left off our engineer, Steve, was busy scanning and creating a 3D model of the F30 stock unit as a reference for our new design. There is an impressive amount of engineering that has gone into this intercooler project already, with more to come. One of the reasons for this attention to detail is because of the wide range of models that this new cooler is going to fit, as seen by our photo gallery. Another reason is because BMW has a pesky habit of living up to their moniker, "The Ultimate Driving Machine," they leave little room for error.

    Steve working the Faro Design ScanArm to create a 3D model of the stock intercooler unit.
    Steve working the Faro Design ScanArm to create a 3D model of the stock intercooler unit.
    Continue Reading »