BLOG CATEGORIES

Mini Cooper

  1. Prototype Fabrication and Fitment - Mini Cooper Intake Development, Part 2

    Prototype Fabrication and Fitment - Mini Cooper Intake Development, Part 2

    In our last post for this project, we went through the stock system and left you with a teaser look at our initial design plans for the filter's heat shield. We now have a functional prototype fabricated, which will soon be ready for testing. Let's go through the interesting process of how we were able to make the heat shield and pipe.

    Parts Fabrication

    Usually, when it comes to creating the pieces to a heat shield, our process involved measuring twice and cutting once with the use of a band-saw, shears and a bender. It was laborious and time-consuming.

    With this project, we took a slightly different approach during the design and prototyping phase of our heat shield R&D. After capturing the dimensions we needed from the vehicle, a prototype design was drawn in 3D modeling software. Once completed, we used our waterjet machine to cut the shapes out of the steel metal sheets.

    If you don't know about the waterjet, it is an apparatus for

    Continue Reading »
  2. Stock System Review - Mini Cooper S Intake Development, Part 1

    Stock System Review - Mini Cooper S Intake Development, Part 1

    Mini Cooper S's have always been fun little hatchbacks with large potential. True enjoyment comes during track days thanks to with their small and light chassis and a lively power-plant. The story is no different here with the newest model Mini Cooper S which is the most recent test subject to make into our garage for some intake R&D.

    Stock System Review

    Our goal here is to provide an enhanced driving experience to those purchasing our Mini Cooper air intake. Let's jump into the stock intake to see what we're working with!

    IMG_0224r
    Aerial view of the Mini Cooper S engine bay

    Continue Reading »