BLOG CATEGORIES

boxer

  1. Overflowing with Style - Overflow Tank, Part 2: Pre-Sale

    Overflowing with Style - Overflow Tank, Part 2: Pre-Sale

    Hello everyone, and welcome to the long-awaited second chapter in the saga of the Mishimoto BRZ expansion tank! I know it's been a little while since our first update, and you all have waited patiently, so I am excited to share some good news about these BRZ parts (or FR-S parts).

    Mishimoto's 2013+ BRZ Expansion Tank Pre-sale

    You might remember from my last update that the stock, ghostly-looking overflow tank that haunts the engine bay of your BRZ, GT86, or FR-S really spooked us. So much so, in fact, that we felt obligated to provide you with an alternative - a way to absolve the BRZ of negative energy and transform your engine bay into something inspiring, rather than terrifying.

    Continue Reading »
  2. 2008+ Subaru WRX/STI Performance Air Intake Part 3: Prototype Testing

    2008+ Subaru WRX/STI Performance Air Intake Part 3: Prototype Testing

    Interested in purchasing our WRX/STi intake? Check out more details on our product page linked below!

    Subaru WRX/STi Performance Cold-Air Intake

    With our initial designs complete and fully assembled, the engineers were ready for testing. We strapped our STI to the dyno and began making some initial pulls with the car completely stock and using the OEM intake. We were averaging upper 250s to lower 260s at the wheels, which was what we expected from this car. After having some fun we removed the factory intake system, including the airbox, air induction tube, and MAF housing. We bolted on our first design and made a few pulls. We found that the air/fuel ratio (AFR) was a bit on the lean side for our tastes, so after a few runs we decided to call it quits for the day and reevaluate this design. Bolting on the second design provided slightly improved AFRs, but they were still at a point where we were

    Continue Reading »
  3. 2008+ Subaru WRX/STI Performance Air Intake Part 2: Prototype Design

    2008+ Subaru WRX/STI Performance Air Intake Part 2: Prototype Design

    Interested in purchasing our WRX/STi intake? Check out more details on our product page linked below!

    Subaru WRX/STi Performance Cold-Air Intake

    Here we are at round two of product development. The shear, brake, and welder had quite a workout as our team set to work on developing two very different prototypes for testing.

    The first design was rather unique and emulated the factory system quite well. This large, box design used a standard panel filter and pulled cold air from the fender/wheel-well area. This unit was very well designed and would keep your engine bay appearing OEM while providing improved power and tone. The design used a large box of undecided material for construction (aluminum vs. plastic) and a short length of piping to house the mass airflow sensor (MAF). While this unit was under construction, a new design was also explored. This one used aluminum intake piping off the

    Continue Reading »