BLOG CATEGORIES

ls3

  1. LEGENDARY COOLING - PERFORMANCE RADIATOR R&D, PART 4 - Dyno Results

    LEGENDARY COOLING - PERFORMANCE RADIATOR R&D, PART 4 - Dyno Results

    It's been three months since our loaner Z06 last bellowed throughout the shop, but our ears are still ringing. The C6 is the very definition (more like DEAFinition) of the American sports coupe. Boisterous doesn't even begin to describe our loaner Corvette. By now, though, we all know how hot these cars are, both figuratively and literally. We're finally at the point where we can test and see just how much of that actual heat we can remove with our new aluminum radiator.

    042318_NLT_C6_RAD_WEB_3

    Ice Packs

    Before we could berate your senses with the full-frontal assault that is the Z06, we had some shop upgrades to fit in. Specifically, we had to make sure that our Dynapack system was up to the task of challenging the ferocious LS7.

    Continue Reading »
  2. Cooling the American Dream - Radiator R&D, Part 2: Performance Testing

    Cooling the American Dream - Radiator R&D, Part 2: Performance Testing

    If you grew up working on cars, you're probably familiar with the clamor that a wrench makes when it hits metal. This sound was once the soundtrack of America, the marching drum of industry. But then came the modern age and that clamor was replaced with the dull thud of plastic. Now, everything is made from plastic. Your computer, your table, your car: plastic. Your Camaro radiator is partly made of plastic, but Mishimoto is changing that.

    At Mishimoto, we see ourselves as modern alchemists, turning plastic into gold"well, aluminum really. It's no secret that aluminum is far more durable than most plastics. Eventually, that plastic radiator end tank is going to crack or break, leaving you and your Camaro steaming at the side of the road. It's hard to predict when this will happen, but it is easy to prevent.

    Continue Reading »
  3. A COLD HEART FOR THE CAMARO - OIL COOLER R&D - PART 2: Prototype & Testing

    A COLD HEART FOR THE CAMARO - OIL COOLER R&D - PART 2: Prototype & Testing

    The pre-sale for this oil cooler kit is now live! You can purchase the 2010-15 Camaro SS Oil Cooler Kit here!

    There's nothing quite like the feeling of powering down the long straight, your right foot trying to turn the throttle into dust, hurtling towards the first turn. As the engine RPM climbs into the red you tell yourself not to lift, keep that foot down until the last second. You've put your heart and soul into your Camaro's engine, and you've placed your trust in your Mishimoto oil cooler. All you need to do now is keep your foot down and let them both do their jobs.

    Combating high oil temperature is something that almost every 5th Gen Camaro SS owner has experienced. The factory liquid-to-liquid oil cooler that we examined in the last post

    Continue Reading »
  4. A Cold Heart for the Camaro - Oil Cooler R&D - Part 1: Stock Review & Plans

    A Cold Heart for the Camaro - Oil Cooler R&D - Part 1: Stock Review & Plans

    For the past seven years the 5th Gen Camaro SS has been a staple of track days at Willow Springs, Road Atlanta, Laguna Seca and just about every other road course in America. Another staple of those track days has been a spike in mild heart attacks as those Camaro SS owners glanced down at their oil temperature gauge to find temps in the 290+°F range.  Even off the track, though, a hot day mixed with a heavy foot can lead to oil temp related heart problems for both you and your Camaro.

    Everything in Balance

    When it comes to modern engines and driving, oil temperatures are a balancing act between hot and cold; thin and thick.  When straight-weight oil, also known as single-weight oil (like SAE 30), is cold, it's thicker and more viscous.  Higher viscosity means that the oil flows slowly and sticks to surfaces longer.  This also means, however, that on cold start-up, it's much harder for the engine to move the oil and thus bearings and wear surfaces

    Continue Reading »
  5. 2004-2006 Pontiac GTO Performance Aluminum Radiator Development

    2004-2006 Pontiac GTO Performance Aluminum Radiator Development

    Want to see all the product details? Check out our product page linked below!

    Mishimoto Pontiac GTO Performance Aluminum Radiator

    Product Introduction and Goals

    Our team has received numerous requests for a reasonably priced, high-performance aluminum radiator for the new-age Pontiac GTO. After reviewing the project and evaluating the current offerings available, we found a vacancy in the market. Our target would be to design a direct-fit unit that provides additional cooling and reliability over the stock radiator with plastic end tanks, while still maintaining a reasonable price point. Although it was available for only a few years in the States, the Pontiac GTO (OK, it's a Holden) was a seriously unique vehicle. The LS engine combined with an optional manual gearbox was ideal for a quick street car or a fun weekend track or autocross car. These cars may be a touch heavy, but thanks

    Continue Reading »