BLOG CATEGORIES

race

  1. Piping Hot - Exhaust R&D, Part 6: Pure, Unadulterated, Awesomeness

    Piping Hot - Exhaust R&D, Part 6: Pure, Unadulterated, Awesomeness

    The last piece of this puzzle has finally fallen into place. Finishing off our offerings for the 2016+ Chevy Camaro SS exhaust systems lands us here with our Race Axleback. The SS has an unmistakable sound, and it's a sound we don't want to stray far away from - we only want to enhance it in the most robust way possible, and I feel that the engineers have done just that.

    I'll make this simple - this exhaust is mean.

    _MG_4196r

    It's a mix of a modern sounding V8 with the raspy aggressive tone of a certain 1970's-era machine that was made of steel, had belt-buckle seat belts and a bad attitude. When this car starts up, it will give unassuming bystanders a jump - I've seen it happen at gas stations when I got to drive it. There are no fancy tricks here, just a raw, unrestricted, unfiltered

    Continue Reading »
  2. Diff's Hot, Take it Easy - Part 1: The Rear Differential

    Diff's Hot, Take it Easy - Part 1: The Rear Differential

    At Mishimoto we are big fans of our little blue car. Over the past few months you could say we have formed a bond that only burnouts and track days can build. In testing various Focus RS parts (and maybe doing a few donuts, for science) we noticed that it is very easy to make the rear differential in the RS angry, and you won't like it when its angry. The rear diff makes the rules. Overheat it, and you're likely to end up parked for the day. When the rear diff heats up, the ECU in the RS pulls power in an attempt to cool it down. Therein lies the problem: We have a car that begs to be driven to the absolute limits and rear diff that is programmed to shut down when it reaches a certain temperature. Don't get us wrong, the problem doesn't seem to be with the diff itself, but rather with its inability to dissipate heat fast enough to keep up with this blue bat out of hell.

    Continue Reading »
  3. The Rise to Power - Downpipe R&D, Part 1: Stock Review

    The Rise to Power - Downpipe R&D, Part 1: Stock Review

    I think we can all agree that the past couple weeks have been quite eventful here in the United States.

    Regardless of which political candidate you supported, it's time to move on and unify now that our election has concluded. Whether or not we're happy about the outcome, we - as a society - need to be working together now. But certain Facebook friends can't seem to figure that out. You all know the one(s). Regardless of their political allegiances, they flood our news feeds with statuses high in pressure and often full of hot air. It's utterly exhausting - if only there were some way to get these people to pipe down.

    The Camaro downpipe connects to the back side of the turbo.
    The Camaro
    Continue Reading »
  4. Sounds from an American Muscle Car - Exhaust R&D, Part 4: Sound Check

    Sounds from an American Muscle Car - Exhaust R&D, Part 4: Sound Check

    A Gaggle of Pipes,

    Hello everyone! You may remember from our previous 2016 Camaro SS Exhaust post that we have decided to move forward with five different systems for this car. It is my pleasure to let you know that all our Camaro exhaust prototypes have been completed. We've been busy testing and re-testing for fitment, sound, durability, and performance - and fun, of course. Our on-road testing process usually begins a little something like this:

    Rob, the project manager: "Hey Gardiner, I need you to take the SS home tonight to put some miles on the pro system."

    Me: "Ugh, if you insist."

    They really have to twist my arm.

    Continue Reading »
  5. Keep your Cool- Transmission Cooler R&D, Part 2: Prototype Fitment

    Keep your Cool- Transmission Cooler R&D, Part 2: Prototype Fitment

    In our last post, we took a look at the stock Mustang automatic transmission cooler and our plans to make it even better. We designed the cooler in Solidworks, based off the measurements obtained from both the GT and the stock cooler. We will be doing our R&D with this bold yellow GT, but based on our research, this cooler will fit all models of S550 Mustang including the EcoBoost and V6. But enough about fitments, the prototype is complete! It is time to see how well our digital design translated into a real-life prototype.

    Mishimoto Mustang trans cooler
    Mishimoto Mustang trans cooler

    So far the trans cooler is looking good. It is much larger than the stock cooler, 50% larger to be exact. The stock cooler comes in at 10 rows, where the Mishimoto

    Continue Reading »
  6. Keep your Cool - Transmission Cooler R&D, Part 1: Prototype Design

    Keep your Cool - Transmission Cooler R&D, Part 1: Prototype Design

    Over the past year we have been getting acquainted with our Mustang GT, and in the process we've developed an entire line of cooling products for it. In the spirit of staying cool, we are on to our next project, the Mustang GT Automatic Transmission Cooler.

    Donor vehicle for Mustang GT trans cooler testing
    Donor vehicle for Mustang GT trans cooler testing

    Heat is generally the enemy of an automatic transmission. In fact, the Ford factory service manual notes that when the GT's computer senses the transmission overheating, it will limit RPMs until the temperature returns to a normal range. There is nothing worse than a track day ending early due to high temps of any kind, including in the transmission. Whether you are taking your GT to the track or

    Continue Reading »
  7. The Heel-Toe Hero - Focus RS Pedal Spacer R&D

    The Heel-Toe Hero - Focus RS Pedal Spacer R&D

    From its conception, the RS was designed to be an enthusiast's dream. The car is beyond agile and begs to be driven within inches of its limits, and assuming its driver is alive and breathing, they are more than happy to oblige. If you have driven a Focus RS, you know that it is happiest heading into a corner, hunkered down, with the RPMs up. With the aggressive driving style that the RS demands, comes the dark art that is heel-toe. Only the best can tame the RS with properly executed downshifts, and in return it will reward you with the exhilarating feeling of powering through a corner.

    Mishimoto's Focus RS
    Mishimoto's Focus RS

    At Mishimoto, we love driving our RS, and in the process of testing various parts on our engineering vehicle, the idea for

    Continue Reading »
  8. It's Only Cool'n' Oil (but your SS likes it) - Oil Cooler R&D, Part 3: Pre-Sale

    It's Only Cool'n' Oil (but your SS likes it) - Oil Cooler R&D, Part 3: Pre-Sale

    Interested in purchasing our 2016+ Camaro SS Oil Cooler in silver or black? The discounted Pre-Sale continues here!

    Mishimoto's 2016 Camaro SS Oil Cooler Pre-Sale

    As the summer drags unremittingly further into the humid, heavy annals of August, it continues to push our air conditioners to the very cusp of their abilities, and I can't help but to dream of cooler weather. I will certainly miss the summer, but a break from the hellish bake of these past few weeks will certainly be welcomed.

    It's pretty safe to say there's not a whole lot that your Camaro likes about this weather. The joy of being on the road notwithstanding, this persistent heat does not otherwise make your car very happy. However, we want your Camaro to enjoy what's left of summer; that's why we have recently released a Mishimoto 2016 Camaro

    Continue Reading »
  9. Mishimoto+Hoonigan: Together at Last - The Story of the World's Greatest Oil Cap

    Mishimoto+Hoonigan: Together at Last - The Story of the World's Greatest Oil Cap

    Order your Hoonigan Oil Cap today! 

    When two independent entities combine their shared strengths with their individual specialties to produce something new, the result is often a product that embodies greatness of a magnitude even grander than that of the parties whence it came - just ask my parents (kidding, Mom and Dad!). Joking aside, we call this effect synergy, and here are a few renowned examples:

    • Peanut Butter and Jelly
    • Snoop and Dr. Dre
    • Disney and Pixar
    • Jobs and Wozniak
    • LS Motors and any chassis ever

    You get the idea. Anyway, you might be wondering where I'm going with this (unless you were enterprising enough to read the title), but I am excited to share with you the newest addition to the above list of greats: Mishimoto is partnering up with Hoonigan to produce some products that are sure to

    Continue Reading »
  10. Working on a Cooler Coyote- Oil Cooler R&D, Part 4: Testing

    Working on a Cooler Coyote- Oil Cooler R&D, Part 4: Testing

    In our last post we took a look at the fabrication of our all-new bar-and-plate oil cooler designed specifically for this project. Now that we have our coolers complete, it is on to testing. We will test our large bar-and-plate cooler, our small bar-and-plate cooler, and our traditional-style 19-row cooler. This will allow us to compare the effectiveness of our new design to the excellent heat exchangers we already offer.

    Testing

    We installed each version and gave them a chance to show us what they could do in not one, but two arenas of performance. Round 1 Fight!

    Contenders:

    • 19-Row Mishimoto Oil Cooler
    • Small cross-flow bar-and-plate cooler
    • Small dual-pass bar-and-plate cooler
    • Large cross-flow bar-and-plate cooler
    • Large dual-pass bar-and-plate cooler

    We hooked up our 19-row cooler to our GT, as well as our all new bar-and-plate coolers, both large and small, and let them duke

    Continue Reading »
Page