BLOG CATEGORIES

ATS 2.0T 2013+

  1. The Rise to Power - Downpipe R&D, Part 2: A Working Prototype

    The Rise to Power - Downpipe R&D, Part 2: A Working Prototype

    Downpipes are a choke point in many turbocharged vehicles when it comes to exhaust flow. As opposed to naturally aspirated cars, less serious thought needs to go into the size of the exhaust piping. In most cases the system just needs to be bigger in diameter, maximizing what you can within the alotted design space.

    The downpipe on the Camaro 2.0T's LTG engine is a restrictive point in the exhaust system, a conclusion brought about by our testing. The point of emphasis is the rate at which exhaust gases are expelled out of the turbocharger. That flow is very important to how well the turbocharger can do its job. If you can flow more exhaust gases, the turbine can spin faster, leading to more boost. It is now time to test the prototype and figure out what our downpipe design can do for this LTG power-plant.

    Continue Reading »
  2. Improved Induction - Silicone Induction Hose R&D, Part 2: Production Sample

    Improved Induction - Silicone Induction Hose R&D, Part 2: Production Sample

    Get a silicone induction hose for your LTG powered Camaro or ATS today:

    Mishimoto Camaro/ATS 2.0T LTG Silicone Induction Hose PreSale

    The quality of the airflow is essential for any vehicle boasting a forced induction system. You would think with a compressor literally sucking volumes of air that it would sort itself out, but that's not always the case. Turbulence, and the resulting inconsistent airflow, is the enemy. Any sort of change in the airflow can cause pressure differentials and ultimately keep your turbocharged engine from rising to its full potential. As laid out in the stock review of the Ecotec LTG induction hose, between the couplings, bends, and the muffler, the stock hose isn't exactly the most efficient design. If you recall, GM engineers have certain criteria to meet in their design process and have to consider a broader consumer

    Continue Reading »
  3. Improved Induction - Silicone Induction Hose R&D, Part 1: Stock Review

    Improved Induction - Silicone Induction Hose R&D, Part 1: Stock Review

    Many would question the motives behind someone who purchases a four-cylinder turbo of what has come to be a staple of the American muscle culture. Personally, I get it. I'm one for combining performance without having to sacrifice fuel economy or aggressive styling. On top of that, turbo engines open a whole new world for modification, and one of the first steps for most is to increase the airflow to the turbo. The engineers at Chevy had to make a trade-off, however, when it came to designing the stock induction hose for the 2.0T Camaro. I'm sure they would prefer designing each aspect of the Camaro to milk every single drop of horsepower out of this newer, and smaller engine, but they also have the noise, harshness, and vibration tests to contend with, which induction sounds fall under. So, in short, they had to trade performance for cost, and comfort, when designing the stock induction hose.

    Continue Reading »
  4. We Get Around - Catch Can R&D, Part 6: Cadillac Field Trip

    We Get Around - Catch Can R&D, Part 6: Cadillac Field Trip

    Though the winter continues to perpetuate chilly weather and monotonous gloom here on the east coast, the future is looking bright for our Mishimoto 2013+ Cadillac ATS catch can kit. After a nice visit to the local Porsche dealership (yes, you read that correctly), armed with some anomalous 50◦ January sunshine, several delicious sandwiches, and our final ATS prototype catch can kit, we've determined that our fitment is just about spot on.

    For those of you just catching up with us now (I crack myself up), this ATS kit is largely the same as our Camaro 2.0T catch can kit, which is now on pre-sale"don't worry, the ATS pre-sale is not far behind!

    However, to properly fit the Caddy, we needed to design a bespoke set of ATS-specific brackets and hoses.

    Continue Reading »
  5. Catch A Wave (of Blow-By) - Part 5: Wait, How Many Cans?

    Catch A Wave (of Blow-By) - Part 5: Wait, How Many Cans?

    Happy 2017, people! I hope you all had wonderful experiences throughout the holiday season and you welcomed in the New Year with a glass of something delicious. I know I did! Whatever you had, I'm sure you enjoyed it much more than your Camaro 2.0T enjoys drinking blow-by. So to begin the year on the right foot, we're going to give you the opportunity to pick up a Mishimoto 2016+ Camaro 2.0T Catch Can kit.

    In my last post, I gave all of the ATS owners a little love and showed you how we route catch can hoses with our loaner Cadillac. Today, it's time to pivot back and take a look at the final setup as it will appear on the Camaro 2.0T. We've been working on a surprise addition to this design that you might want to check out.

    Continue Reading »
  6. Little Caddy - Catch Can R&D, Part 4: ATS Hose Routing

    Little Caddy - Catch Can R&D, Part 4: ATS Hose Routing

    Hello to all my wonderful Camaro 2.0T and Cadillac ATS owners! In our last update, we made the big reveal of our patent-pending blow-by tap. We drilled down into the details of how we plan on mining that nasty vein of oil vapor out of your LTG and transporting it to a catch can, instead of into your intake manifold.

    Today, we're going to take it back to basics a little bit and look specifically at that whole "transport" element. To go even further back to basics, check out our technical section to see why blow-by is so bad for your engine over time. You know all about the complex, unique parts of this Camaro catch can project, but what about something as simple and ubiquitous as the hoses?

    Continue Reading »
  7. Don't Worry Baby - Catch Can R&D, Part 3: Drilling In and Striking Oil

    Don't Worry Baby - Catch Can R&D, Part 3: Drilling In and Striking Oil

    Good afternoon, Camaro 2.0T and Cadillac ATS owners, and welcome to the latest R&D post for our 2013+ Cadillac ATS and 2016+ Camaro 2.0T catch can kit. For a recap on why you might want to remove blow-by from your engine, check out our technical article ALL about the nasty stuff. We've got some pretty awesome developments to share, but first let me begin by"

    Setting the Scene

    Imagine, for a moment, the warm hue of soft, August light, gently bathing the wooded pastures of northwestern Pennsylvania in a quilt of contrasting gold. The sun lingers low in the late-afternoon sky and casts heat over the valleys, but the breeze brings with it a subtle bite; a subdued, but confident nod to autumn's imminent arrival.

    For most, this weather typically imparts an assured sense of calm as the summer comes to a close,

    Continue Reading »
  8. Help Me Ronda, Help Me Get 'er Outta My Intake - Catch Can R&D, Part 2: Testing for Blow-by

    Help Me Ronda, Help Me Get 'er Outta My Intake - Catch Can R&D, Part 2: Testing for Blow-by

    Last time, in the first Camaro 2.0T catch can R&D post, we learned a little bit about blow-by, the CCV system, and how a catch can serves to prolong the life of your Camaro. If you need a refresher, we have a technical article all about why blow-by is terrible for your engine. We left off with Steve setting up his testing rig, but I want to go into a bit more detail on what exactly we wanted to test.

    Test Prep

    As we discovered in the first post, the OEM system appears to have three different CCV valves. On further investigation, we found that these three valves comprise two separate systems. One system features two CCV valves on the valve cover that connect at a T-joint and run to the intake.

    Continue Reading »
  9. God Only Knows (how much oil's in your intake) - Catch Can R&D, Part 1: Stock Review

    God Only Knows (how much oil's in your intake) - Catch Can R&D, Part 1: Stock Review

    There's nothing quite like plopping oneself into the car to leave work on a summer evening, beach-bound and brimming, windows down, to the tune of the sunset vibes that arrive hand-in-hand with the heavy midsummer air of July. Our Mishimoto R&D facility is located in New Castle, DE, and around here, people tend to favor numerous seaside towns in Southern New Jersey or in Delaware.

    A true slice of Americana, an evening stroll down the main drag of a typical east coast beach town is sure to leave anyone with a faint smile, humming "Surfin USA" and craving more frozen custard, or maybe another gin and tonic. The competing smells of crisp, briny sea air and sweet, fried funnel cake assuage the senses, while the voices of The Beach Boys emanate lazily and intermittently from the windows of passing cars. That's right west coasters, we have beaches here too, and we also have surfer girls, boardwalks, waves to catch, and even the occasional deuce coupe or

    Continue Reading »