BLOG CATEGORIES

Page 5 - camaro

  1. "The TurboChevy" - Intake R&D, Part 1: The Stock System

    "The TurboChevy" - Intake R&D, Part 1: The Stock System

    Chevy really decided to make history with this brand-new Camaro. It has the smallest motor ever offered in a Camaro and also marks the first Camaro with a four-cylinder power-plant since the third generation. This is also the first time any Camaro has been offered with a factory-installed turbocharger. To put that in perspective, the last time any Chevy even offered a factory-turbocharged, rear wheel drive vehicle with a manual transmission was back in the 1960's with the Corvair! My parents weren't even out of grade school yet!

    This 2.0L turbocharged LTG Ecotec motor puts out a factory-rated 275hp with 295ft-lbs of torque at the crank. If you haven't already, see below for a quick clip of the stock dyno pulls we made on this car to see what numbers we were able to get!

    Continue Reading »
  2. Tell Her About Them - Exhaust R&D, Part 3: Axleback Options

    Tell Her About Them - Exhaust R&D, Part 3: Axleback Options

    Our Mishimoto chefs have been very busy in our R&D kitchen, cooking up some wonderful 2016 Camaro exhaust prototypes with our 3D-modeling CAD software. Using nothing short of the finest ingredients, they have created a suite of 2016 Camaro SS exhaust options that are so delicious, Guy Fieri's mouth would surely be watering at the sight - though I'm sure he'd be even more tantalized if these were compatible with the first-gen Camaro!

    Jiro Dreams of Mishi

    We have decided to release five different 2016 Camaro exhaust systems, and we think they should satisfy just about anyone with an SS and a hunger for some killer sound. As we determined the crimped section upstream of the axle-back does not have an impact on power output, but it does make the system sound more refined. We will be retaining that section

    Continue Reading »
  3. She's My Turbo Lover - Mishimoto's New 2016 Camaro 2.0T Engineering Vehicle

    She's My Turbo Lover - Mishimoto's New 2016 Camaro 2.0T Engineering Vehicle

    One of the best parts about a small, dynamic company like Mishimoto is that there is never a dull moment around our R&D facility. Change happens frequently, and no two days are the same. At any given time, we've got a solid fleet of engineering vehicles at our disposal that serve as development platforms for our exciting new products, and over time, we become intimately acquainted with each vehicle's characteristics and quirks; each develops a personality and earns its own place on the Mishimoto team. This makes it tough to see them go, but it is always exciting to welcome on a new team member.

    This week, it was time for our 2015 Ford Mustang EcoBoost to move on to bigger and better things. We had the car around for a decent amount of time and grew quite fond of it, but our engineers could never quite relax in its presence, particularly when they were gathered in large crowds for meetings.

    However, the circle

    Continue Reading »
  4. Cooling the Camaro - Radiator R&D, Part 2: 3D Models

    Cooling the Camaro - Radiator R&D, Part 2: 3D Models

    Greetings everyone! I hope you all enjoyed Cinco de Mayo last week. We celebrated here at the Mishimoto R&D Center with a salsa and dip competition - let me tell you, many of our team members have just as much talent in the kitchen as they do in the design center (and those of us who don't were grateful taste testers).

    Though our schedules have been VERY busy with projects, the beginning of show season, and maybe a few siestas here and there (definitely a necessity after all those corn chips!), our engineers have been able to squeeze in some time designing our improved aluminum 2016 Camaro SS radiator. I am here to show you the fruits of their labors! Let's take a peek at what they created.

    2016 Camaro radiator - Front View
    2016 Camaro radiator - Front View
    Continue Reading »
  5. Just the Way You're Crimped - Exhaust R&D, Part 2: Testing the Crimp Myth

    Just the Way You're Crimped - Exhaust R&D, Part 2: Testing the Crimp Myth

    Greetings, Camaro enthusiasts, and welcome to Part 2 of the Mishimoto R&D blog series on our 2016 Camaro SS Exhaust! As you may remember, we took a gander last time at the OEM exhaust, paying special attention to some of the really cool design features that make this system unique. One feature has emerged as a real point of contention and has become so hotly debated, that I wouldn't be surprised to hear about it on the next CNN Presidential Town Hall. I am referring, of course, to the crimped section of piping near the rear axles.

    For those of you not in the know, a variety of theories exist about the function of this design, and there is some uncertainty as to what its implications on power output might be.

    Well, we are here to put an end to the confusion. In the name of science, we have dyno tested the car with the ONLY changed variable being the presence or absence of the crimped section. Before I get to the results,

    Continue Reading »
  6. House of the Rising Engine Temperatures - Thermostat Housing R&D, Part 1: 3D-Print

    House of the Rising Engine Temperatures - Thermostat Housing R&D, Part 1: 3D-Print

    For those of you not familiar with the climate here in New Castle, Delaware, let me educate you on our summers; they are hot, and they are HUMID. In the dead of the July heatwave, there is nothing worse than smoldering in an apartment with no AC. I am always very appreciative of the little part of my psyche that drives me, once I can barely stand the heat, to pause Top Gear, get off the couch, and grab a cold, refreshing drink. If I were a car, that little part of my psyche would have a name, and it would be called a thermostat.

    2016 Camaro thermostat housing (OEM) next to some of our other 2016 camaro parts
    2016 Camaro thermostat housing (OEM) next to some of our other 2016 camaro parts

     

    What is a Thermostat, and in what Neighborhood
    Continue Reading »
  7. With a Little Help from My Aux Rads - Auxiliary Radiator R&D, Part 1: Stock Review

    With a Little Help from My Aux Rads - Auxiliary Radiator R&D, Part 1: Stock Review

    2016+ Camaro Auxiliary Radiator Discounted Pre-Sale has begun!

    As I'm sure many of you know, we strive for transparency here at Mishimoto, and we love sharing our development process with all of you. There are many benefits to this, and hearing your feedback ranks highly among them. That said, our search for inspiration is wide-reaching and multidisciplinary. Just recently, I happened upon an interview with Noam Chomsky, renowned thinker and MIT professor, who is quoted as saying: "I like the cold weather. It means you get more work done".

    I think Chomsky missed his calling in the automotive parts industry, because his sentiment is very much in line with how we feel about coolant temperatures in your 2016 Camaro SS. To that end, I'm sure he would be thrilled to learn that we have begun development on a brand new set of Camaro auxiliary radiators!

    Factory Review

    Continue Reading »
  8. Eliminating the Eyesore. Mishimoto 2016 Camaro Expansion Tank R&D, Part 2: 3D-Printed Prototype

    Eliminating the Eyesore. Mishimoto 2016 Camaro Expansion Tank R&D, Part 2: 3D-Printed Prototype

    Design work and refinement continue with our 2016 Camaro expansion tank. To verify fitment within the constraints of the engine bay, we've 3D printed a prototype in plastic to install on our test vehicle.

    Check out a few shots of this prototype installed!

    Prototype 2016 Camaro coolant expansion tank installed
    Prototype 2016 Camaro coolant expansion tank installed

    The image above shows the tank with a sight tube instead of a sight glass, which we used on our previous 3D models. We are experimenting with both designs to determine which is easier to read and which is going to provide the most durability. Let us know what you think!

    Continue Reading »
  9. (I Can't Get No) Low Oil Temps - Oil Cooler R&D, Part 1: Stock Review

    (I Can't Get No) Low Oil Temps - Oil Cooler R&D, Part 1: Stock Review

    Here at the Mishimoto R&D facility in New Castle, DE, we are hard at work designing 2016 Camaro parts, but we've been experiencing some pretty inconsistent weather lately. We've had brief glimpses of spring, but this past weekend has thrust us back into the sulk of the winter that we so naively thought was behind us. As one might imagine, we're really looking forward to some sunshine and scorching summer weather! But do you know what is NOT looking forward to the heat?

    You got it! The oil in your 2016 Camaro SS.

    That's right, folks, you needn't fret anymore; Mishimoto has tasked our engineers with making you and your oil much more comfortable by kicking off the development process for a snazzy new 2016 Camaro oil cooler!  Our company is full of enthusiasts, and we understand how frustrating the fear of overheating can be when you have to pass on autocross or cut off those last few runs at the strip. Let's take a quick look at what we've got going on from the factory

    Continue Reading »
  10. It's Still OEM to Me - Exhaust R&D, Part 1: Stock System Review

    It's Still OEM to Me - Exhaust R&D, Part 1: Stock System Review

    As much as we like to keep things cool here at Mishimoto, we couldn't keep ourselves away from the exhaust system once we got our hands on the hot new 2016 Camaro SS. This is a very impressive car, but we have a few ideas on how to make it even better.

    Now let's give credit where credit is due; GM did pretty well on this one, and even the stock 2016 Camaro exhaust took our breath away. It sounds absolutely sublime, and I'm sure you will all agree after giving it a listen.

    But once our engineers picked their jaws up off the floor and stopped doing burnouts in the parking lot, they told us that we weren't the only ones having breathing problems after hearing that monstrous 2016 Camaro exhaust. In fact, they told us that the exhaust might make it hard for that glorious LT1 to breathe too! Fortunately, this ailing patient came to the right doctors; our team reckons they can make some improvements to help this

    Continue Reading »