Page 9 - teammishi

Quick update for this awesome degas bottle project! Our engineering team has been working to construct an aluminum degas bottle design for the 6.0, using our 3D-modeling software. We've incorporated some neat features, and we've included factory-style hose connection points and bottle mounts.

Let's take a look!

Mishimoto 6.0 Powerstroke degas bottle 3D model

In this model you can see our plans for maintaining an appropriate fluid level. A simple sight tube will do the trick for our bottle design. You can also see the machined cap threads that we designed to function with the factory cap.

With our cold-side piping complete, it was time to focus on the hot side. This portion of the piping system would require a bit more attention, mainly because we were unable to scavenge any existing pipes from our WRX/STI front-mount intercooler kits (as we did with the cold side). Let's get to it!

Piping Fabrication

The hot-side piping will route from the turbocharger compressor outlet, around the driver side of the engine bay, and into the front bumper area to attach to the intercooler.

Here is a look at the turbocharger connection point.

2015 STi front-mount intercooler hot-side pipe turbo connection

A coupler attaches the pipe to the turbocharger.

We are quite excited about the completion of our final prototype intake for the Ford Fiesta ST (FIST)! After months of development, testing, and design work, we are ready to present our final creation. First we will go through each component and cover important details regarding their features.

Silicone Turbo Inlet Hose

Starting at the turbocharger compressor inlet, we have our silicone inlet hose. This piece was constructed specifically for this kit and is extremely robust.

Mishimoto's Ford Fiesta ST intake silicone inlet hose

Five layers of silicone comprise this hose, along with embedded fibers and steel wire for added rigidity. This hose must withstand the suction created

We are nearing the completion of this project. Our engineering team is ready for dyno testing that will verify any power gains made with our larger-diameter intercooler piping. Exactly how much larger is the piping we designed?

The Mishimoto hot-side design provided the greater increase in volume between the two, coming in at a 51% increase over the stock pipe.

Fiesta ST charge pipe

We're back with another update! Our team has been busy constructing our functional Ford Fiesta ST (FIST) intercooler prototypes, putting a lot of work into the R&D design stages, and now we get to see if it pay off. Enough of the wait, lets jump right into some images of our five prototype coolers.

Ford Fiesta ST intercooler prototypes

Ford Fiesta ST intercooler prototypes

Check out the fifth segment of the Mishimoto 2016 Camaro SS video review series! In this video we provide an in-depth look at the factory-equipped transmission/differential cooling system.

Our next video will include details about the front suspension of our SS.

Thanks for watching!

-John

At Mishimoto, our job is to bring you more than just exceptional cooling products. Another product category that we offer is exhausts, and what better car for an exhaust project than the fantastic-sounding Mustang GT!

The stock system on the Mustang GT sounds pretty darn good as is, but after inspection we found some ways that we could improve on the stock design. If you aren't familiar, here are some photos of the stock Mustang GT exhaust.

Stock Mustang GT exhaust

Stock Mustang GT exhaust

Our first segment of this STI intercooler project involved the test fitting of our WRX crash beam and intercooler core. We were able to verify fitment of both pieces, which allowed our team to move on to piping fabrication. We are starting this kit with the cold-side pipe, which we've decided to place this on the passenger side of the engine bay to reduce the piping length as much as possible. Following this strategy should help reduce lag seen by the driver.

Pipe Fabrication

The cold-side pipe is a great place to start because we are able to use a portion of one of our existing kits. Because the 2015 model shares the EJ from the 2008+, we will be reusing the pipe that attaches to the throttle body and incorporates the BPV (bypass valve).

" width="300" height="180">

We're back with another in-depth look at our 2016 Camaro SS. This video covers the functionality and components included in the factory radiator system. In addition to the radiators, Jason also discusses the stock oil cooler setup and its unique features.

Check it out!

Thanks for watching!

-John

Interested in picking up our 2008-2014 WRX/STi overflow tank? Check out our discounted pre-sale linked below.

2008-2014 Subaru WRX aluminum overflow tank pre-sale!

We last left you with some details of our initial design and a hint of an upcoming pre-sale for this overflow tank. Unfortunately, since that initial test fit we hit a few snags in the design process. Our goal with this product is to provide compatible fitment with all our other 2008+ WRX and STi components. This required numerous stages of test fitting, one of which revealed an issue. With our larger 3-row X-Line aluminum radiator installed, our sight tube on this expansion tank design ended up too close to the belt drive system on our Subaru.

We decided a revision was necessary. Although the two components were not physically touching, the clearances were just too tight for our comfort. Luckily, our team had an