Page 17 - teammishi

After removing both catch cans for data collection in our previous post, we discussed the idea of relocating the bracket that holds the PCV catch can to a different area in the engine bay. We mentioned earlier that we were toying with the idea because the current location of the Fiesta ST catch can raised some concerns. One of them being that the current location for the catch can would interfere with right-hand drive (RHD) applications of the Fiesta ST, and we want this catch can to be all inclusive. In addition, it came to our attention later on that it would also interfere with some aftermarket intakes.  We try to take common Fiesta ST parts upgrades into consideration so that the products we make will fit all Fiesta STs. The consensus was that because there was a bit more room further forward in the engine bay to relocate the catch can, that would be the way to go.

Bracket and Hose Setup

With this new location in mind our engineers began fabricating a

Interested in purchasing our F30 intake system? Check out our product page for more information!

Mishimoto BMW F30 Performance Intake!

With testing and data collection complete, we assembled our final prototype BMW F30 air intake to confirm that the full kit fits flawlessly prior to starting production. We have been pretty excited to see this unique kit come together. Check it out in its final form!

Final Intake Images

Our final prototype BMW F30 intake was cut from a sheet of metal using a waterjet. Once we had the template cut to our drawing and model specs, we bent each piece appropriately.

First, the base of our airbox.

So far this Fiesta ST has had an interesting life with Mishimoto. The very same day that we drove it off the lot, it was rolled into our development facility and fitted for its first modification: a prototype baffled catch can kit. Why did we chose to begin with this? From our experience with other EcoBoost equipped vehicles, we know how prone these engines are to blow-by and carbon buildup. If you want to read more in depth about the benefits of a catch can, check out our complete write up on Blow-By 101. Installing a catch can right away allows us to protect the engine of our new development vehicle and gives us more time for data collection as we work on developing additional Fiesta ST parts. Last, but certainly not least of all, we asked for your feedback and received an overwhelming response to create a Fiesta ST catch can (yes we do listen to you!).

Interested in purchasing our new Civic Si intake system? Check out more details on our product page linked below!

Mishimoto Honda Civic Si Performance Air Intake

Now that we had a functional prototype, it was time to perform some dyno testing to ensure that we were on target for producing a power-adding intake system. The dyno results would provide some base-line data so we could move forward with refining our intake design.

Dyno Runs

We quickly strapped the Si onto our Dynojet in preparation for our day of testing.

Honda Civic strapped to Dynojet for intake testing

Interested in purchasing our F30 intake system? Check out our product page for more information!

Mishimoto BMW F30 Performance Intake!

We already knew our BMW F30 intake system looked fantastic within the engine bay of the F30. With our final prototype design fully complete, it was time to see if our intake system would produce any improvements in both intake sound and power output.

Dyno Runs

We strapped our test vehicle to the Dynojet and began making pulls. This particular vehicle was equipped with a aftermarket tuning device, and we would be checking data both with and without this software as a means to compare the stock intake system to our prototype design.

Interested in picking up our Mercedes CLA45 intake system? Check out our product page for more details.

Mishimoto Mercedes-Benz CLA45 AMG Performance Air Intake

We've been working on this Mercedes cold-air intake for months, and finally we have arrived at our last test fit. After constructing a final prototype of our Mercedes air intake, we phoned our test vehicle owner and wrangled him into coming down to our headquarters for another day. A big "thank you" to the vehicle owner for the use of his CLA!

Installed Shots

Everything fit into place perfectly and looks fantastic! First, take a look at our final silicone intake inlet hose and pressure-sensor flange.

" width="300" height="200">

Interested in picking up our Fiesta ST aluminum radiator? Check out our discounted pre-sale linked below.

Mishimoto 2014+ Ford Fiesta ST Aluminum Radiator Pre-Sale!

If you keep up with the perpetually bustling engineering team here at Mishimoto, you would have noticed our recent projects involving the Focus ST. We could not ignore this vehicle's little brother, the Fiesta, and after numerous requests we decided it was time to start development of new performance Fiesta ST parts.

Before jumping into development, we needed a vehicle. So, we made a trip to the local Ford dealer here in Delaware and drove back in the beauty shown below.

" width="300" height="200">

Interested in purchasing our BRZ/FR-S Fan Shroud Kit? Check out more details at the link below!

Mishimoto Subaru BRZ / Scion FR-S / Toyota GT86 Plug-N-Play Aluminum Fan Shroud Kit!

Taking a look at our lineup of products for the BRZ/FR-S reveals a solid offering in both cooling performance and power-adding upgrades. Our engineering team has evaluated numerous vehicle systems and provided upgrade components where solutions were needed. Our intake components provide improved induction noise and nice increases in power. Our oil cooler system provides a solution for high oil temperatures on the track. And, our performance aluminum radiator is ideal for track vehicle owners looking for some additional peace of mind during long-duration lapping. These are just a few of the components we currently offer, and we've managed to find yet another opportunity to provide an awesome

Interested in picking up our Mercedes CLA45 intake system? Check out our product page for more details.

Mishimoto Mercedes-Benz CLA45 AMG Performance Air Intake

Mishimoto CLA45 AMG intake system

It is a pretty exciting week here at Mishimoto! All our final prototype components for this awesome intake system have arrived. We have plenty of images to share, and we are excited to get our test vehicle back in the shop to confirm our final design.

Final Prototype Inlet Hose

One of the most discussed pieces included in this kit is our turbocharger inlet hose. This piece connects the turbocharger compressor