Page 2 - silicone

It's now time to test fit our prototype 350Z intake hose to verify fitment. If any changes are needed to enhance or ease the installation process, now is the time to do so.

Mishimoto silicone 350Z intake hose installed

We have a slight adjustment to make on the length of the CCV hose connection, but otherwise, our 350Z intake hose mounted nicely.

Mishimoto silicone 350Z induction hose installed

Dyno Testing

We've got another awesome project in the works for the 8th-generation Honda Civic Si! Our recently released performance intake system received great feedback from customers, but it also identified an additional need for intake system components. We decided to develop a Civic Si induction hose made from silicone to replace the stock rubber unit.

Stock Civic Si Induction Hose

Before jumping into the design of our prototype hose, check out a few shots of the stock unit.

Stock Honda Civic parts

" width="640" height="426">

If you follow our engineering blog you may have noticed some recent attention on the 8th-generation Civic Si. Well, we aren't making a push for just this generation. We also want to dive into the 9th-generation and develop some unique new parts to improve this awesome car.

Our first project will be quite simple: to produce a Civic Si induction hose that replaces the stock rubber unit. This upgrade provides improved durability as well as pleasing aesthetics for those seeking some engine bay style. We have seen slight power increases with intake hoses developed in the past, so we will be dyno testing our component to bust any myths around power gains.

Stock Civic Si Induction Hose

Stock Honda Civic parts

The

We recently designed a performance intake system for the 2003-2006 Nissan 350Z. This included an airbox and filter that attaches to the end of the stock mass airflow (MAF) housing. Our results were positive in that we achieved a significant improvement in intake sound, and we increased power output by 10 whp and 13 wtq without any additional tuning.

This project is not so much performance oriented but is intended to add reliability and additional aesthetic appeal to the intake system on the Z.

To start this project, we rolled our test vehicle into our development facility and started inspecting the stock piece. Check out our test subject.

350Z intake hose test vehicle

Interested in picking up this awesome E46 fan setup? Check out our discounted pre-sale linked below!

Mishimoto BMW E46 Non-M Performance Fan Shroud Kit Pre-Sale

Functional Prototype

In a short timespan we were able to turn our 3D models into an actual functional prototype. Check out a couple images of our first BMW E46 fan shroud!

Mishimoto prototype E46 parts

Interested in picking up this awesome E46 fan setup? Check out our discounted pre-sale linked below!

Mishimoto BMW E46 Non-M Performance Fan Shroud Kit Pre-Sale

Our E46 product line continues to grow. This series of articles aims to tack another offering on our list of performance cooling components. We've covered the radiator, expansion tank, and coolant hoses. The only radiator-related item left to tackle is a cooling fan solution.

The stock 3-Series E46 offers two different fan options. Automatic models are equipped with an antiquated mechanical fan, while those who row their own gears get an electric fan.

Our goal with this project is to produce a BMW E46 fan shroud solution that will function with either a manual or automatic model. We will be following our trend of successfully producing exo-style shrouds for the E46 M3 and E36 chasses. The idea behind this fan mount style is

Interested in purchasing our E46 silicone radiator hose kit? Check out our product page linked below!

Mishimoto BMW E46 Non-M Silicone Radiator Hose Kit!

The E46 BMW has been the focus for a ton of product development here at Mishimoto. Recent projects include the Mishimoto Performance Air Intake, Aluminum Radiator, and Aluminum Expansion Tank. To continue our pursuit of supplying a full cooling solution for the 3-series, we also tackled a set of radiator hoses for this model. In typical Mishimoto fashion, we will be looking to improve the durability of the stock design.

Stock Hose Setup

The stock BMW E46 radiator hose system is unique, mostly due to the inclusion of quick-disconnect fittings at each mating point. Take a look at the stock hoses pulled from our test vehicle during radiator testing and development.

Interested in purchasing our 6.4L coolant filter kit? Check out our product page for more information!

Mishimoto Ford 6.4L Powerstroke Coolant Filter Kit

Final Prototype Bracket

Welcome back! Our final bracket prototype is in and ready for installation. Check it out!

Mishimoto 6.4L coolant filter bracket

Mishimoto 6.4L

Interested in purchasing our 6.4L coolant filter kit? Check out our product page for more information!

Mishimoto Ford 6.4L Powerstroke Coolant Filter Kit

We mentioned in our 6.0L coolant filtration thread that we would be tackling the 6.4L as well. Let's take a look at some of the components our team has been putting together for the 6.4L kit.

Although the 6.4L does not seem to be as susceptible to buildups as is the 6.0L, a coolant filtration setup is certainly still a worthy investment in preventive maintenance.

So let's get started!

Filter Housing

We'll start with the filter housing. As mentioned in our 6.0L thread, we developed a housing with a wide range of adjustability that could be utilized for a variety of kits. This housing is shown below.

Interested in picking up our 6.4L Powerstroke coolant hose kit? Check out our product page linked below!

Mishimoto Ford 6.4L Powerstroke Silicone Coolant Hose Kit

Our full prototype unit has arrived and is ready for some final test fitting! Before introducing our final product, let's take one last look at the stock hose setup.

Stock 6.4L radiator hoses

Now, check out the Mishimoto prototype kit!

" width="300" height="163">