Page 18 - teammishi

Interested in purchasing our F30 intake system? Check out our product page for more information!

Mishimoto BMW F30 Performance Intake!

Time for an update on our F30 intake project! Check out the continued progression of our development below!

Airbox Base Fabrication

We left off last time with the completion of our intake pipe fabrication that leads to the airbox. Next on the list: assembling our airbox and refining the design to the appropriate shape we wanted to achieve.

We started with the base of the box, which will be utilizing the factory air duct to acquire a cool stream of airflow.

Airbox base cardboard template

Interested in picking up this awesome aluminum expansion tank? Check out more details on our product page linked below!

Mishimoto Subaru WRX Aluminum Coolant Expansion Tank

Last year we released an aluminum expansion tank for the 2004-2014 STI and 2002-2007 WRX. We received a ton of awesome feedback from customers and enthusiasts regarding this component, as well as recommendations to produce such a tank for 2008-2014 WRX owners.

While we normally highlight our development process in multiple installments, for this Expansion Tank we wanted to give you everything in one quick shot.

Stock Expansion Tank

Although we don't see quite as many failures with the 2008-2014 expansion tank, we can assume it will incur some wear over time. This tank sits relatively close to a very hot turbocharger/exhaust and handles coolant with temperatures

Interested in picking up our Focus ST oil cooler kit? Check out our product page for more details.

Mishimoto Ford Focus ST Oil Cooler Kit

With a solid cooler mounting location in place, it was time to hit the road and collect some much needed data. In the past, we've had great results with our oil cooler kits in terms of temperature reduction, so we have no reason to believe this kit would perform any differently.

Testing Setup and Conditions

Before jumping in the car, we needed to set up our data collection equipment. We use AEM software and sensors to record temperature data for our oil cooler kits. We also use inline pressure sensors to ensure that we are retaining factory-like pressures.

Recording the stock system was easily done with our NPT sandwich plate adapter, as shown below.

Interested in picking up this awesome catch can system? Check out our product page for more details.

Mishimoto Ford Focus ST Baffled Oil Catch Can Kit

After making mockups for our initial setup and evaluating short-term testing data, our team came to a few conclusions. First, we would be incorporating our catch can into the PCV line only. Our brief accumulation test showed that we had substantial fluid accumulation with the PCV line, while the CCV can ended up dry. Second, our mounting location was really subtle and created a factory-like fitment with no visible lines. Last, the ST produces quite a lot of contaminants even in a short period of time, so a catch can is going to be a great upgrade in terms of preventive maintenance.

Bracket Fabrication

Next on our to-do list was final bracket fabrication. Something more stout and aesthetically pleasing were our targets. We would also

Interested in purchasing our new BRZ/FR-S intake system? Check out more details on our product page linked below!

Subaru BRZ / Scion FR-S Performance Air Intake

After solidifying our product design we needed to capture data to verify the design and determine if any changes were necessary. We strapped our test vehicle to the dyno and began making pulls! Check out a compilation video from the dyno testing. The audible difference in intake tone and volume is quite noticeable when comparing the stock setup with the Mishimoto prototype.

Testing Results

On to the important part, results from our tests. Intake upgrades generally

Interested in picking up our Focus ST oil cooler kit? Check out our product page for more details.

Mishimoto Ford Focus ST Oil Cooler Kit

Continuing with our progress last time, we were set on constructing a prototype bracket so that we could fully install our system and collect some on-road data.

Cooler Bracket Fabrication

When we left you our team had selected an appropriate cooler location and had started making a bracket template for the heat exchanger. Once we had a general idea of the size, bends, and hole location, we started making a bracket from plate steel.

Interested in picking up this awesome catch can system? Check out our product page for more details.

Mishimoto Ford Focus ST Baffled Oil Catch Can Kit

Ford Focus ST test vehicle

As you may be aware, our engineering team has been wrenching away on this Focus ST to develop a slew of awesome products for the community. Our oil cooler development is underway, and alongside this project we began to experiment with a direct-fit oil catch can system. Now, you may be wondering exactly how necessary such a product is.

Discussions around the community have covered the impact of oil within the intake system and its effect on valve buildup. In short, the

Interested in purchasing our new BRZ/FR-S intake system? Check out more details on our product page linked below!

Subaru BRZ / Scion FR-S Performance Air Intake

We left off last time with an explanation of our intentions with this intake system and some initial design work to create an induction route to our planned airbox. Now it was time to finish designing this intake system so that testing could be conducted.

Airbox Fabrication

We started developing our airbox with simple metal fabrication. The plan was to put our idea into a physical object and then transfer this to a 3D model. Once in Solidworks, we could solidify the final design and features and use our 3D printer to construct a final prototype for test fitting.

Fabrication begins! A simple box was drawn up and templates printed for our bends and mounting point locations.

Interested in picking up our Focus ST oil cooler kit? Check out our product page for more details.

Mishimoto Ford Focus ST Oil Cooler Kit

After knocking out some projects for Japanese turbocharged vehicles and European sports cars, we finally freed up some garage space and engineering time to begin much needed development on one of the hottest hatchbacks on the market.

As general gearheads, we have been keeping a close eye on the Focus in terms of aftermarket product support as well as how the enthusiast world accepted this new vehicle. We found numerous gaps in product support for cooling, yet a very active and enthusiastic community of Focus addicts.

We have a ton of awesome plans for the ST, the first of which is a direct-fit oil cooler solution. Throughout the past few years we have had numerous requests for this component. It seems that extensive

Interested in purchasing our new Civic Si intake system? Check out more details on our product page linked below!

Mishimoto Honda Civic Si Performance Air Intake

Stock Si engine bay

With a K-series power plant, 6-speed manual transmission, and a limited slip differential, the Si is a great choice as a fun commuter that can double as an autocross machine on the weekends. As with any performance vehicle, more power is always on the minds of enthusiasts. Mishimoto has been working to develop brand-new intake systems for a variety of vehicles, and the 8th generation was next on our list for some R&D.